Parcel Orders over $300 Ship Free.
Euclid Euco-Guard 100 5 Gallon Pail
Euclid Euco-Guard 100 is a solvent-based siloxane sealer in a 5 gallon pail. It penetrates concrete and masonry to block water and chlorides without changing the look of dry concrete.
- Chloride screen for decks, bridges, and ramps
- Works on new or old concrete, dry or damp
- Beading water-repellent surface after cure
$446.46
Drop Shipped
Euclid Euco-Guard 100 Siloxane Water and Chloride Repellent, 5 gallon pail
Euclid Euco-Guard 100 is a solvent-based penetrating siloxane water and chloride repellent. It is used on new and old exterior concrete and masonry, including parking structures, bridges, ramps, marine platforms, and repair bays. It leaves little change on dry concrete, treated surfaces bead water, and it is used on dry or damp (not saturated) concrete. Air temperature should be 40 F and above.
Key Features
- Penetrating siloxane chloride and water barrier
- Little to no change in appearance on dry concrete
- New or old concrete, dry or damp (not saturated)
- High alkali resistance
- Full protection in one treatment
- Federal AIM Rule VOC
Applications
- Parking structures.
- Bridges, lane barriers, and ramps.
- Marine platforms.
- Auto and truck repair bays.
- Exterior concrete surfaces.
Technical Specifications
| Property | Value |
|---|---|
| VOC | 730 g/L |
| Active content | 10% by weight |
| Dry to touch | 1 to 2 hours |
| Foot traffic | 4 to 6 hours |
| Wheel traffic | 10 to 12 hours |
| NCHRP 244 Series IV, water uptake | 92.5% reduction at 21 days |
| NCHRP 244 Series IV, chloride ion | 96.0% reduction at 21 days |
| Coverage, troweled smooth | 125 to 150 ft²/gal |
| Coverage, broomed textured | 75 to 125 ft²/gal |
| Application temperature | 40 F and above |
Documents
Euco-Guard 100 Technical Data Sheet
Frequently Asked Questions
Where is Euclid Euco-Guard 100 used?
Parking structures, bridges, lane barriers, ramps, marine platforms, auto and truck repair bays, and exterior concrete.
What is the VOC of Euclid Euco-Guard 100?
Typical laboratory VOC is 730 g/L.
What is the NCHRP 244 water-uptake reduction of Euclid Euco-Guard 100?
Typical laboratory reduction in water uptake is 92.5% at 21 days (NCHRP 244 Series IV). Chloride ion uptake reduction is 96.0%. Expect reasonable variation under field conditions.
What is the coverage of Euclid Euco-Guard 100 on troweled concrete?
Approximate coverage on troweled smooth concrete is 125 to 150 ft²/gal. Broomed textured concrete is 75 to 125 ft²/gal. Rates are for estimating only.
What application temperature does Euclid Euco-Guard 100 need?
Do not use below 40 F.
How soon is Euclid Euco-Guard 100 ready for foot traffic?
Typical laboratory foot traffic is 4 to 6 hours. Wheel traffic is 10 to 12 hours. Expect reasonable variation under field conditions.
Please complete your information below to login.