Euclid Euco 700 is a two-component, 100% solids semi-rigid epoxy joint filler for control and construction joints in industrial concrete floors. It supports joint edges and reduces spalling from wheel traffic.
Euco 700 is a two-component, 100% solids semi-rigid epoxy joint filler for control and construction joints in industrial concrete floors. It supports joint edges and cuts spalling from wheel traffic, in line with ACI 302 recommendations for epoxy joint fillers. Neutral Base takes Euclid Universal Color Packs: one pack per 2 gal unit, stirred into Part A. Stock Standard Gray is the 2 gal Standard Gray unit. Traffic in about 24 hours at 70°F.
| Property | Value |
|---|---|
| Manufacturer | Euclid Chemical |
| Product | Euco 700 Neutral Base |
| Type | Semi-rigid industrial floor joint filler |
| Color | Neutral Base plus Universal Color Packs |
| Color pack | 1 pack per 2 gal unit, into Part A |
| Compressive strength | 3,000 psi |
| Tensile strength | 690 psi |
| Pot life | about 15 minutes |
| Traffic | about 24 hours at 70°F |
| ACI 302 | Epoxy joint filler recommendations |
| Packaging | 2 gal unit |
| Shelf life | 1 year unopened |
Product documents: Euco 700 Technical Data Sheet
How do I color Neutral Base?
Stir 1 Euclid Universal Color Pack into Part A per 2 gal unit, then mix all of Part B into Part A for 2 to 3 minutes.
Is Standard Gray in stock as a sister?
Yes. The live sister is Euco 700 Standard Gray in the same 2 gal unit.
When should it be installed?
ACI 302 recommends installing joint fillers as late as possible after construction so additional slab shrinkage is limited. Traffic in about 24 hours at 70°F.
Please complete your information below to login.