Parcel Orders over $300 Ship Free.
Euclid Versaspeed 100 50lb Bag
Euclid VersaSpeed 100 is a single-component, rapid-strength repair mortar for horizontal and form-and-pour work. Light-duty traffic as soon as 1 hour, and non-breathable coatings after 4 hours at 70 F. Working time about 15 minutes. Integral corrosion inhibitor.
- Light-duty traffic as soon as 1 hour
- Coat with epoxy after 4 hours at 70 F
- Neat 1/4 to 4 in; extend up to 6 in
$23.08
Availability:
In stock
( 166 Available )
Euclid VersaSpeed 100 Rapid-Hardening Repair Mortar, 50 lb
Euclid VersaSpeed 100 is a single-component, rapid-hardening, shrinkage-compensated repair mortar that is micro-fiber reinforced for horizontal and form-and-pour work. It is used on bridges, roads, parking decks and ramps, loading docks, warehouses, and industrial, commercial, and institutional floors, including formed vertical and overhead placements. The mortar is similar in appearance to concrete, freeze-thaw resistant, and listed to Alberta Transportation Specification B391.
Key Features
- Rapid-hardening, shrinkage-compensated mortar
- Micro-fiber reinforced
- Integral corrosion inhibitor
- Similar in appearance to concrete
- Freeze-thaw resistant
- Alberta Transportation Specification B391
Applications
- Bridges, roads, and pavements.
- Parking decks, ramps, and loading docks.
- Warehouses, industrial floors, and formed vertical and overhead work.
Technical Specifications
| Property | Value |
|---|---|
| 1-hour compressive | 2,600 psi |
| 3-hour compressive | 5,000 psi |
| 28-day compressive | 10,500 psi |
| 28-day flexural | 1,500 psi |
| 28-day slant shear | 2,700 psi |
| Freeze/thaw, 300 cycles | 98% |
| Working time | 15 minutes |
| Final set | 20 to 40 minutes |
| Application thickness | neat 1/4 to 4 in; extended 1 to 6 in |
| Yield | 0.39 ft³ per 50 lb |
Documents
VersaSpeed 100 Technical Data Sheet
Frequently Asked Questions
When is Euclid VersaSpeed 100 open to light-duty traffic?
Light-duty traffic is as soon as 1 hour. Standard tire traffic is 2 hours following final set. Typical laboratory values. Expect reasonable variation under field conditions.
What 1-hour cube strength does Euclid VersaSpeed 100 reach?
Typical laboratory value is 2,600 psi at 1 hour on 2 inch cubes (ASTM C109). 3-hour compressive strength is 5,000 psi; 28-day is 10,500 psi. Expect reasonable variation under field conditions.
Which Alberta listing covers Euclid VersaSpeed 100?
Euclid VersaSpeed 100 meets Alberta Transportation Technical Standards Specification B391. That listing is on the current VersaSpeed 100 data sheet.
When is Euclid VersaSpeed 100 ready for an epoxy coating?
It can be coated with epoxy systems after 4 hours at 70 F. Typical laboratory value. Expect reasonable variation under field conditions.
What temperature window does Euclid VersaSpeed 100 cover?
Application temperature range is 35 to 85 F. Keep the repair from freezing until 3,000 psi. Typical laboratory values. Expect reasonable variation under field conditions.
What neat thickness does Euclid VersaSpeed 100 cover?
Neat thickness is 1/4 to 4 inches. Extended placements are 1 to 6 inches.
Please complete your information below to login.