Parcel Orders over $300 Ship Free.
Euclid Speed Crete Red Line 50lb Bag
Euclid Speed Crete Red Line is a rapid-setting, no-slump cementitious repair mortar for interior and exterior vertical, overhead, and horizontal patches. Initial set 8 to 20 minutes; shave to contour after set.
- No-slump vertical, overhead, and horizontal patches
- Shave window after the 8 to 20 minute initial set
- 1/8 to 2 in without forming
$27.69
Availability:
In stock
( 113 Available )
Euclid Speed Crete Red Line, 50 lb Bag
Euclid Speed Crete Red Line is a rapid-setting, cement-based repair mortar of blended portland cements, selected aggregates, and additives that undergo hyper hydration. It is used on interior and exterior vertical and overhead concrete and masonry, including pipe and precast. The mortar can be shaved to contour after set, and is compatible with galvanic anodes.
Key Features
- Rapid-setting cement-based repair mortar
- Shaved to contour after initial set
- Vertical and overhead, interior and exterior
- Compatible with galvanic anodes
- No-slump consistency
- Low-permeability matrix from hyper hydration
Applications
- Vertical and overhead concrete repair.
- Horizontal patches at no slump.
- Interior and exterior restoration.
Technical Specifications
| Property | Value |
|---|---|
| 1-day compressive | 2,550 psi |
| 28-day compressive | 5,700 psi |
| Initial set | 8 to 20 minutes |
| Final set | 15 to 30 minutes |
| Application thickness | 1/8 to 2 in |
| Freeze/thaw, 300 cycles | 96.75% |
| Yield | 0.47 ft³ per 50 lb |
Product documents: Speed Crete Red Line TDS
Frequently Asked Questions
When is Euclid Speed Crete Red Line used?
Euclid Speed Crete Red Line is for interior and exterior vertical and overhead repairs, including concrete pipe and formed or precast concrete. It is used at a no-slump consistency.
What is Euclid Speed Crete Red Line?
It is a rapid-setting, cement-based repair mortar of blended portland cements, finely processed selected aggregates, and chemical additives that undergo hyper hydration to a stable, low-permeability matrix.
What set time does Euclid Speed Crete Red Line have?
Initial set is 8 to 20 minutes. Final set is 15 to 30 minutes (ASTM C266).
What compressive strength does Euclid Speed Crete Red Line reach?
Typical laboratory values are 2,550 psi at 1 day, 4,000 psi at 7 days, and 5,700 psi at 28 days (ASTM C109). Expect reasonable variation under field conditions.
When is Euclid Speed Crete Red Line shaved?
After initial set, it can be shaved to the contour of the surrounding surface.
What application thickness does Euclid Speed Crete Red Line have?
Application thickness is 1/8 to 2 inches.
Please complete your information below to login.