Parcel Orders over $300 Ship Free.
Albion AT600 Air Powered Cartridge Applicator 300ml x 300ml
Albion AT600 is a two-hand pneumatic applicator for 1:1 epoxy joints, crack injection, and anchors.
- Two-hand brace on 1:1 300x300 work
- Shop-air flow on thick 1:1 epoxy
- Convertible to 2:1 as a published property
$580.43
Availability:
In stock
Drop Shipped Albion AT600 Air-Powered Cartridge Applicator 300 ml x 300 ml
The Albion AT600 is a two-hand pneumatic applicator for 1:1 epoxy and adhesive on construction joints, crack injection, and chemical anchors. It ships as 1:1 for 300 ml x 300 ml cartridges and is convertible to 2:1 as a published property. Crews keep both hands on the AT600 so thick 1:1 material stays on line while shop air does the work on the deck.
Looking for another option?
Key Features
- Two-hand 1:1 300x300 joints, crack injection, and anchors
- Shop-air flow on thick 1:1 epoxy
- Upright stance for cartridge reload
- Quick exhaust stop on a 1:1 bead
- Ships as 1:1 and is convertible to 2:1 as a property
- Pneumatic reverse for the next cartridge
Applications
- Construction joints with 1:1 two-component epoxy
- Crack injection on 1:1 300x300 cartridges
- Chemical anchors and bolt setting
- Two-hand braced beads in front of the body
- Shop-air flow on thick 1:1 adhesive
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer / Model | Albion Engineering AT600 |
| Tool Type | Air-powered multi-component cartridge applicator, two-hand standard handle |
| Capacity (as shipped) | Twin 300 ml cartridges (300 x 300 ml, 20.2 oz / 600 ml total) |
| Mix Ratio | As shipped 1:1; convertible to 2:1 with change-over parts included |
| Drive | Pneumatic, powered forward and reverse |
| Cartridge Outside Diameters | 1:1, 2 × 2 in. | 2:1, 2 × 1 15/32 in. |
| Cartridge Part Numbers | 741-G02 / 741-G03 (600 Series 1:1 and 2:1; change-over parts included) |
| Air Cylinder | 4 in. diameter |
| Listed Pressure | 90 PSI |
| Maximum Operating Pressure | 120 PSI |
| Thrust | 1,130 lbf |
| Air Consumption | 1 CFM |
| Quick Disconnect | 1/4 in. style J or M |
| Weight | 9.6 lb |
| Dimensions | 22.5 × 6.5 × 6.5 in. |
| Country of Origin | Taiwan |
| Bulletin | Bulletin 318B (202105); Bulletin 283C (201807) |
Product documents: PNEUMATIC MULTI-COMPONENT Cartridge Applicator Bulletin 318B (PDF) | 600 SERIES MULTI-COMPONENT Applicator - 1:1 & 2:1 MIX RATIOS Bulletin 283C (PDF) | AT-Line Operating Instructions (PDF)
Frequently Asked Questions
When should I pick as-shipped 1:1 Albion AT600 instead of as-shipped 2:1 AT600X2?
Pick the AT600 when the datasheet calls for 1:1 in a 300 ml x 300 ml cartridge. Pick the AT600X2 when the sheet calls for 2:1 in a 300 ml x 150 ml cartridge as shipped. Mix on the sheet is the reason. Each model also lists conversion the other way as a property, not as a procedure on this page.
When should I use two-hand Albion AT600 instead of the AT600-S suitcase?
Use the AT600 when both hands can stay on the applicator so a 1:1 joint, crack, or anchor stays on line in front of the body. Use the AT600-S suitcase when one hand has to run a wall, floor, or overhead line. Handle stance is the choice on the same as-shipped 1:1 cartridge.
Which 1:1 jobs is the Albion AT600 built for?
Albion lists the AT600 for construction joints, crack injection, adhesive placement, and bolt setting with 1:1 two-component epoxy and adhesive. That is the 600-series 1:1 jobsite path. Shop air keeps thick 1:1 material moving on those placements.
Does the Albion AT600 ship as 1:1 with 2:1 conversion as a published property?
Yes. The AT600 ships set up for 1:1 300 ml x 300 ml cartridges and Albion publishes conversion to 2:1 as a property, with change-over parts included. This page does not walk a change-over procedure. If you want 2:1 as shipped, the live sister is the AT600X2.
When is shop-air Albion AT600 a better pick than a manual 600 ml applicator?
Use the AT600 when thick 1:1 epoxy would stall a manual 600 ml applicator on a long joint or a deep anchor hole. Shop air moves the material while both hands brace. Keep a manual 26:1 twin such as the B26T600 when shop air is not on the deck.
Can crews inject cracks with the Albion AT600?
Yes. Albion lists crack injection among AT600 uses on 1:1 two-component epoxy. Two-hand control keeps the mixer on the crack while shop air meters the flow. Quick exhaust stops the bead when the crack takes what it needs.
Please complete your information below to login.