Unisorb V-1 Non-Shrink Grout

Unisorb V-1 Premium Non-Shrink Grout. Cement-based, 48 lb bag. Mix 3.67, 3.84, 4.00, or 4.32 quarts of water. About 0.40 cu ft. Min 1 in. Pumpable.

48 lb bag; 3.67 / 3.84 / 4.00 / 4.32 qt water
About 0.40 cu ft; min 1 in section
Pumpable; V-100 epoxy listed separately

$48.56

Drop Shipped

Details

Unisorb V-1 Premium Non-Shrink Grout

Unisorb V-1 is a cement-based, premixed non-shrink grout. Mix one 48 lb bag with 3.67, 3.84, 4.00, or 4.32 quarts of water for plastic, flowable, fluid, or extra-fluid mix. Yield is about 0.40 cu ft. Minimum section is 1 in. Maximum is 2 to 3 in without pea gravel; extend 50% by weight with pea gravel for thicker pours. Pumpable. Expansion happens during mix and plastic set. Use it on turbines, generators, precision machine tools, and equipment base plates. V-100 epoxy grout is listed separately.

Key Features

Cement-based premixed non-shrink grout
Water 3.67 / 3.84 / 4.00 / 4.32 qt per 48 lb bag
Plastic, flowable, fluid, or extra-fluid mix
About 0.40 cu ft yield
Minimum 1 in; 2 to 3 in max without pea gravel
Pumpable; expansion during mix and plastic set

Applications

Turbine and generator base plates
Setting Vector Bolts and other anchors
Fixators, leveling wedges, machine bases

Technical Specifications

Property	Value
Manufacturer	Unisorb
Product	V-1 Premium Non-Shrink Grout
Bulletin	GB-0144-1.1 Rev. 1
Pack	48 lb moisture-resistant bag, 0.40 cu ft
Water	3.67 / 3.84 / 4.00 / 4.32 qt per 48 lb
Consistency	plastic / flowable / fluid / extra-fluid
Min section	1 in
Max section	2-3 in without pea gravel
Pumpable	yes
Initial set	about 5 to 6.5 hr by water
Sister	V-100 epoxy listed separately