Five Star Epoxy Novolac Coating 3.9 Gallon

Five Star Epoxy Novolac Coating is a two-component, 100% solids, highly chemical resistant epoxy coating for horizontal and vertical applications effective on both steel and concrete.

High Chemical Resistance
Quick Return to Service
Chip and Crack Resistant

$1,021.43

SKU

14623

Five Star Epoxy Novolac Coating – High-Performance Chemical Resistant Epoxy

Five Star Epoxy Novolac Coating is a two-component, 100% solids, highly chemical-resistant epoxy coating designed for both horizontal and vertical applications on steel and concrete surfaces. Engineered for superior resistance to acids, bases, and solvents, this durable epoxy is ideal for secondary containment, industrial floors, loading areas, and process equipment support pads. With quick return-to-service capabilities and low permeability, Five Star Epoxy Novolac Coating provides long-term protection in aggressive chemical environments.

Key Features:

High chemical resistance to acids, bases, and solvents
100% solids, two-component epoxy formula
Quick return to service – as early as 24 hours
Low permeability for superior moisture resistance
Resistant to chipping and cracking
Can be applied with a roller, brush, squeegee, or spray
Excellent adhesion to steel and concrete
Ideal for secondary containment, floors, and trenches

Technical Specifications:

Property	Value
Color	Light Gray
Film Thickness	15-24 mils
Pot Life at 70°F (21°C)	35 minutes
Hardness (Shore D, ASTM D2240)	80-90
Tensile Strength (ASTM D638)	5,600 psi (38.6 MPa)
Compressive Strength (ASTM D695, 7 Days)	10,000 psi (70.0 MPa)
In-Service Time (Standard Use)	1-7 days
In-Service Time (Hydrocarbon Exposure)	24 hours
Tack-Free Time	3 hours

Frequently Asked Questions:

What are the typical applications for Five Star Epoxy Novolac Coating?
It is commonly used for secondary containment, process areas, chemical loading docks, industrial floors, and equipment support pads.

How is this coating applied?
It can be applied using a roller, brush, squeegee, or spray equipment for even coverage.

What is the minimum application temperature?
The substrate should be at least 40°F (4°C) and rising for proper application.

How long does it take to cure before returning to service?
Standard use requires 1-7 days for full cure, but hydrocarbon exposure areas can be used after 24 hours.

For the latest technical specifications and application guidelines, visit Five Star Products.

More Information