Adhesives Technology Ultrabond HYB-2CC 14oz

High strength hybrid anchoring adhesive that’s approved for multiple anchor types. Approved for use in dry, damp and water-filled holes, Ultrabond HYB-2CC features a higher creep resistance and a longer shelf life than alternatives.

Withstands freeze-thaw conditions
Extended installation temperature range
Rapid strength development – fully cured in 30 minutes at 68 °F

$26.66

Availability: Out of stock

SKU

20892

Details

ULTRABOND HYB-2CC – 14oz Cartridge

ULTRABOND HYB-2CC is a two-component, 10:1 ratio hybrid anchoring adhesive designed for structural anchoring of threaded rod and reinforcing bar in cracked or uncracked concrete. Tested to ICC-ES AC308 and ACI 355.4 and carrying ESR-4535 approval, it offers reliable load performance under seismic and wind conditions. It can be installed in dry, water-saturated, and water-filled holes across a wide temperature range, with certification for potable water system use:contentReference[oaicite:1]{index=1}.

Looking for another size?

Key Features

ICC-ES ESR-4535 approval for cracked and uncracked concrete:contentReference[oaicite:2]{index=2}.
Evaluated to ACI 355.4 and ICC-ES AC308 structural anchoring standards.
Complies with IBC/IRC, Florida Building Code, and City of Los Angeles approvals.
NSF/ANSI 61 certified for potable water system components.
Non-sag formulation with a 10:1 mix ratio by volume.
Service temperature range from 23°F to 104°F for installation.
Qualified for Seismic Design Categories A through F.
Suitable for dry, water-saturated, and water-filled conditions.

Applications

Anchoring threaded rod and reinforcing bar in cracked or uncracked concrete.
Alternative to cast-in-place rebar per ACI 318 and IBC Chapter 19:contentReference[oaicite:3]{index=3}.
Overhead, vertical, horizontal, and inclined installations.
Seismic anchoring in all seismic categories.
Potable water system applications requiring NSF/ANSI 61 approval.

Technical Specifications

Mix Ratio	10:1 by volume
Consistency	Non-sag hybrid adhesive
Installation Temperature Range	23°F to 104°F (-5°C to 40°C)
Compressive Yield Strength (7 day)	Up to 15,049 psi (ASTM D695, Class C):contentReference[oaicite:4]{index=4}
Bond Strength (Hardened Concrete, 14 day)	Up to 3,270 psi (ASTM C882):contentReference[oaicite:5]{index=5}
Heat Deflection Temperature	258°F (126°C):contentReference[oaicite:6]{index=6}
Water Absorption (14 day)	0.90% (ASTM D570):contentReference[oaicite:7]{index=7}
Approvals and Certifications	ICC-ES ESR-4535, IBC/IRC, Florida Building Code, City of Los Angeles, ASTM C881 / AASHTO M235, NSF/ANSI 61:contentReference[oaicite:8]{index=8}
Packaging	14oz cartridge

Frequently Asked Questions

Is HYB-2CC approved for cracked concrete?
Yes, it is evaluated and approved under ICC-ES ESR-4535:contentReference[oaicite:9]{index=9}.

Can it be installed in wet or water-filled holes?
Yes. The adhesive is suitable for dry, water-saturated, and water-filled holes:contentReference[oaicite:10]{index=10}.

Does it meet potable water requirements?
Yes, HYB-2CC is certified under NSF/ANSI 61 for drinking water system components:contentReference[oaicite:11]{index=11}.

What is its service temperature range?
Long-term service up to 212°F, short-term up to 320°F:contentReference[oaicite:12]{index=12}.

More Information