Euclid EucoRepair V100 is a single-component, quick-setting, low-shrinkage repair mortar with polymer and fiber reinforcement for vertical and overhead concrete repair.
Euclid EucoRepair V100 is a single-component, quick-setting, low-shrinkage mortar for vertical and overhead concrete repair. Polymer-modified and fiber-reinforced, it carries an integral corrosion inhibitor and is certified for potable-water contact. Place 1/8 to 4 in per lift on walls, 1/8 to 2 in overhead, on parking structures, bridges, tanks, tunnels, and marine work. Also available as the 46 lb bag.
| Property | Value |
|---|---|
| Manufacturer | Euclid Chemical |
| Product | EucoRepair V100 |
| Type | Low-shrinkage fiber-reinforced vertical/overhead mortar |
| Compressive strength | 2,000 psi at 3 hours; 6,000 psi at 28 days |
| Bond strength | >1,400 psi at 7 days; >1,800 psi at 28 days |
| Set times | Initial about 20 min; final about 35 min |
| Working time | About 10 to 15 minutes at 72 F |
| Thickness | Vertical 1/8 to 4 in; overhead 1/8 to 2 in per lift |
| Compliances | NSF/ANSI/CAN 61; ASTM C928 |
| Mix water | 0.9 to 1.0 gal per 46 lb unit |
| Packaging | 5 gal pail |
Product documents: EucoRepair V100 Technical Data Sheet
What is Euclid EucoRepair V100?
A single-component, quick-setting, low-shrinkage mortar for vertical and overhead concrete repair. Polymer modified, fiber reinforced, with a corrosion inhibitor, and certified for potable water.
Bag or pail?
This chemistry is sold as a 46 lb bag and a 5 gal pail. Mix only what can be placed within about 15 minutes.
Can it be used as a floor topping?
No. Do not use it as a horizontal topping. It is a vertical and overhead repair mortar.
Potable water tanks?
Yes, NSF/ANSI/CAN 61. Wet cure 3 days, then air cure 4 days before filling the vessel.
Please complete your information below to login.