Euclid Eucocrete 50lb Bag

Eucocrete is a versatile, single-component, microsilica-modified repair mortar that contains an integral corrosion inhibitor for concrete repair projects of all types. Requiring only the addition of water, Eucocrete is a high strength material with an extended working time for ease of placement.

Minimizes project downtime with rapid setting.
Offers diverse repair options for various needs.
Ensures long-lasting performance, extending the service life of structures.

$30.17

SKU

19431

Euclid EUCOCRETE – High-Performance Concrete Repair Mortar (50 lb Bag)

Euclid EUCOCRETE is a versatile, high-strength repair mortar enhanced with microsilica and an integral corrosion inhibitor for long-lasting concrete restoration. This single-component, pre-blended product only requires the addition of water and is ideal for vertical, horizontal, and overhead form-and-pour repair applications from 1 inch to full depth. With extended working time, excellent freeze-thaw durability, and compatibility with exterior and interior concrete, EUCOCRETE is well-suited for infrastructure repair, parking decks, beams, equipment pads, and more. Its low permeability and sulfate resistance ensure long-term performance even in harsh environments.

Key Features:

Microsilica-modified for high early and ultimate strength
Single-component mix; only add water
Pre-mixed with pea gravel – ready to use
Contains corrosion inhibitor to protect embedded steel
Low permeability with excellent freeze-thaw durability
Extended working time allows for large placements
Interior or exterior use; vertical, overhead, and horizontal
Meets ASTM and CSA durability standards

Applications:

Concrete repair for decks, beams, and pavements
Form-and-pour vertical and overhead repairs
Joint edge and corner repair
Equipment bases and foundation restoration
Parking structures and balconies
Large volume placements requiring deep section repair

Technical Specifications:

Property	Value
Compressive Strength (ASTM C109)	1 day: 5,000 psi, 28 days: 9,750 psi
Flexural Strength (ASTM C348)	7 days: 900 psi, 28 days: 1,050 psi
Freeze/Thaw Resistance (ASTM C666)	96% relative dynamic modulus after 300 cycles
Sulfate Resistance (ASTM C1012)	+0.011% length change at 6 months
Working Time	2 hours 30 minutes
Set Time (ASTM C403)	Initial: ~3 hrs, Final: ~4 hrs
Coverage	~4.5 ft² at 1" depth per 50 lb bag
Yield	0.37 ft³ per 50 lb bag

Frequently Asked Questions:

Can EUCOCRETE be extended with aggregate?
Yes, it can be extended with up to 15 lb of 3/8" saturated surface-dry pea gravel for deep repairs over 6 inches.

What surface preparation is required?
Substrates must be clean, sound, and profiled to ICRI CSP 5–7. Bonding agents such as DURALPREP A.C. or EUCOWELD 2.0 are recommended for best results.

What is the typical finish for EUCOCRETE?
It is designed for float or broom finishes. While steel trowel finishing is possible, it can be challenging over large areas.

More Information