Euclid EucoRepair SCC Fast 50lb Bag

Euclid Eucorepair SCC Fast is a versatile, one-component, self-consolidating repair mortar specially formulated for rapid repairs. It features shrinkage compensation, polymer and microfiber modifications, and an integral corrosion inhibitor. Designed for horizontal and formed vertical/overhead structural repairs, it is suitable for applications from 1 inch (2.5 cm) to full depth.

Designed for rapid repairs, reducing downtime and project delays.
Comes pre-mixed with pea gravel for easy, ready-to-use application.
Contains an integral corrosion inhibitor, enhancing durability in repaired areas.

$46.62

Availability: Out of stock

SKU

18724

Euclid Eucorepair SCC Fast – Rapid-Setting Self-Consolidating Concrete Repair (50 lb)

Euclid Eucorepair SCC Fast is a fast-setting, one-component, shrinkage-compensated repair mortar formulated for structural concrete repair. This self-consolidating cementitious mix is pre-blended with pea gravel, requires no additional aggregate, and is designed for use in horizontal, formed vertical, and overhead repairs at depths of 1 inch or greater. Enhanced with pozzolans, microfibers, and an integral corrosion inhibitor, it offers excellent flowability, freeze-thaw resistance, and early strength development. With a working time of 20–30 minutes and compressive strength of 2,500 psi in just 2 hours, Eucorepair SCC Fast allows same-day form stripping and early coating application—ideal for infrastructure and industrial repairs requiring a fast return to service.

Key Features:

Rapid hardening – 2,500 psi in 2 hours
Self-consolidating; no vibration needed in most applications
Contains integral corrosion inhibitor for rebar protection
Shrinkage-compensated and low permeability
Excellent freeze/thaw resistance – >95% durability after 300 cycles
Can be coated with epoxy just 5 hours after final set
Fiber-reinforced and pozzolan-modified for crack resistance
Ready-to-use with pre-blended pea gravel

Applications:

Parking decks and balconies
Pavement and joint repairs
Beams, formed vertical, and overhead repairs
Equipment foundations and bases
Form-and-pour applications where quick strength is required

Technical Specifications:

Property	Value
Working Time	20–30 minutes
Initial Set Time (ASTM C403)	~50 minutes
Compressive Strength (ASTM C39)	2 hr: 2,500 psi; 1 day: 4,500 psi; 7 day: 6,000 psi; 28 day: 8,000 psi
Flexural Strength (ASTM C78)	1 day: 500 psi; 28 day: 1,000 psi
Slump Flow (ASTM C1611)	24–29 inches
J-Ring Flow (ASTM C1621)	26.5 inches
Rapid Chloride Permeability (ASTM C1202)	< 300 coulombs
Bond Strength (ASTM C882)	1 day: 2,200 psi; 28 days: 3,500 psi
Yield	0.37 ft³ per 50 lb bag

Frequently Asked Questions:

What is the minimum recommended depth of application?
Eucorepair SCC Fast should not be used for repairs less than 1 inch in depth.

Can it be coated or sealed the same day?
Yes, it can be coated with an epoxy as early as 5 hours after final set at 70°F (21°C).

Is vibration required during placement?
In most cases, vibration is not necessary due to the material’s self-consolidating flow. However, light vibration may be used if needed for tight formwork.

More Information