Parcel Orders over $300 Ship Free.
Euclid EucoRepair SCC 50lb Bag
Eucorepair SCC is a versatile, one component, self-consolidating repair mortar that is shrinkage-compensated, polymer and microfiber modified, and contains an integral corrosion inhibitor. It is designed for horizontal and formed vertical/overhead structural repairs in applications from 1 inch (2.5 cm) to full depth.
- Pre-mixed with pea gravel, ready-to-use
- Low permeability with excellent freeze-thaw resistance
- Contains an integral corrosion inhibitor
$28.66
Euclid EucoRepair SCC 50lb Bag
Euclid EucoRepair SCC is a one-component, self-consolidating concrete repair mortar designed for horizontal and formed vertical or overhead structural repairs. This shrinkage-compensated formula is polymer and microfiber modified, contains an integral corrosion inhibitor, and is premixed with pea gravel for ready-to-use convenience. It is designed for repairs from 1 inch to full depth where flowability, durability, and low permeability are important.
Key Features
- Self-consolidating repair mortar for structural repairs.
- Shrinkage compensated to help minimize cracking.
- Polymer and microfiber modified.
- Contains an integral corrosion inhibitor.
- Premixed with pea gravel and ready to use.
- Low permeability with excellent freeze-thaw resistance.
- Long working time with sustained slump flow.
- Suitable for interior and exterior repairs.
Applications
- Parking decks.
- Joint repairs.
- Balconies.
- Equipment bases.
- Pavements.
- Beams.
- Horizontal structural repairs.
- Formed vertical and overhead repairs.
Technical Specifications
| Property | Value |
|---|---|
| Product Type | Self-consolidating concrete repair mortar |
| Packaging | 50 lb bag |
| Yield | Approximately 0.375 ft3 per bag when mixed with 0.5 gal of water |
| Mix Water | 0.45 to 0.50 gal per bag |
| Compressive Strength | 1 day: 2,750 psi; 3 days: 4,100 psi; 7 days: 4,800 psi; 28 days: 5,600 psi |
| Flexural Strength | 1 day: 450 psi; 7 days: 800 psi; 28 days: 900 psi |
| Slant Shear Bond Strength | 7 days: 2,400 psi; 28 days: 2,560 psi |
| Initial Slump Flow | 24 to 33 inches |
| Slump Flow at 30 Minutes | 24 to 33 inches |
| J-Ring Slump Flow | 25 inches |
| Passing Ability | 0.75 inch with no visible blocking |
| Initial Set Time | Approximately 9 hours |
| Rapid Chloride Permeability | 1,800 coulombs at 28 days |
| Surface Resistivity | 31,200 ohm-cm at 28 days |
| Freeze-Thaw Resistance | Greater than 98% relative dynamic modulus after 300 cycles |
| Length Change | 28 day shrinkage less than 0.050% |
| Crack Resistance | Net time until cracking: 15.5 days; potential for cracking: Moderate-Low |
| Use Range | Repairs from 1 inch to full depth |
FAQs
What is EucoRepair SCC used for?
It is used for horizontal and formed vertical or overhead structural concrete repairs such as parking decks, balconies, pavements, beams, joint repairs, and equipment bases.
What makes EucoRepair SCC different from standard repair mortars?
It is self-consolidating, premixed with pea gravel, shrinkage compensated, polymer and microfiber modified, and contains an integral corrosion inhibitor.
Does EucoRepair SCC require vibration?
Typically no. Vibration is generally not required, although form vibration can be used in restricted flow situations if it is not excessive.
Can EucoRepair SCC be extended with aggregate?
No. The manufacturer specifically states that it should not be extended with aggregate.
Can EucoRepair SCC be used as a topping?
No. It is not intended for use as a topping.
How should EucoRepair SCC be cured?
Cure exposed surfaces with a high-solids curing compound from Euclid Chemical, or wet cure for a minimum of three days if a curing compound is not desired.
Please complete your information below to login.