Parcel Orders over $300 Ship Free.
Adhesives Technology Ultrabond NS 1300 9oz Case 12

Adhesives Technology Ultrabond NS 1300 9oz Case 12

Adhesives Technology Ultrabond 2 22oz Case 12

Adhesives Technology Ultrabond 2 22oz Case 12

Adhesives Technology Ultrabond HYB-2CC 28oz

High strength hybrid anchoring adhesive that’s approved for multiple anchor types. Approved for use in dry, damp and water-filled holes, Ultrabond HYB-2CC features a higher creep resistance and a longer shelf life than alternatives.

  • Withstands freeze-thaw conditions
  • Extended installation temperature range
  • Fully cured in 30 minutes at 68 °F
$39.15
Availability: In stock ( 10 Available )
SKU
18001

ULTRABOND HYB-2CC - 28oz Cartridge

ULTRABOND HYB-2CC is a hybrid anchoring adhesive formulated with a 10:1 mix ratio for threaded rod and post-installed rebar in cracked or uncracked concrete. It is evaluated to ICC-ES AC308 and ACI 355.4 and carries ICC-ES ESR-4535 approval. Suitable for dry, water-saturated, and water-filled holes, it supports seismic and wind load designs across a wide installation temperature range.

Looking for another size?

Key Features

  • ICC-ES ESR-4535 approval for cracked and uncracked concrete.
  • Compliant with IBC and IRC, City of Los Angeles, and Florida Building Code.
  • NSF/ANSI 61 listing for potable water system components.
  • 10:1 mix ratio by volume with non-sag consistency.
  • Installation temperature range from 23°F to 104°F.
  • Qualified for Seismic Design Categories A through F.
  • Assessed for creep performance up to 212°F long term and 320°F short term.
  • Installs in dry, water-saturated, and water-filled holes.

Applications

  • Anchoring fractional or metric threaded rod into structural concrete.
  • Post-installed rebar connections per ACI 318 Chapter 19 and Chapter 17.
  • Vertical down, horizontal, inclined, and overhead anchor placements.
  • Seismic anchoring for categories A through F.
  • Potable water facilities requiring NSF/ANSI 61 compliance.

Technical Specifications

Mix Ratio 10:1 by volume
Consistency Non-sag hybrid adhesive
Installation Temperature Range 23°F to 104°F (-5°C to 40°C)
Compressive Yield Strength (7 day) 15,049 psi (ASTM D695, Class C at 73°F)
Bond Strength to Hardened Concrete Up to 3,270 psi at 14 days (ASTM C882)
Heat Deflection Temperature 258°F (126°C) (ASTM D648)
Water Absorption 0.90% at 14 days (ASTM D570)
Approvals and Listings ICC-ES ESR-4535; IBC and IRC; City of Los Angeles; Florida Building Code; AASHTO M235 / ASTM C881 Type I, II, IV, V Grade 3 Class A, B, C; NSF/ANSI 61
Hole Conditions Dry, water-saturated, and water-filled
Packaging 28 fl oz cartridge

Frequently Asked Questions

Is HYB-2CC approved for cracked concrete?
Yes. It is covered by ICC-ES ESR-4535 for cracked and uncracked concrete.

Can I install anchors in water-filled holes?
Yes. The adhesive is suitable for dry, water-saturated, and water-filled holes when using threaded rod or rebar.

What service temperature limits apply?
The system is assessed for long-term loads up to 212°F with short-term exposure up to 320°F.

Is HYB-2CC acceptable for potable water?
Yes. It is certified to NSF/ANSI 61 for drinking water system components.

What mix ratio does the cartridge use?
The cartridge dispenses a 10:1 ratio by volume for consistent proportioning.

More Information
Brand Adhesives Technology
Size 280z
Manufacturer Adhesives Technology