Parcel Orders over $300 Ship Free.
Adhesives Technology HS-1CC Ultrabond 22oz A22-HS1CC
Ultrabond HS-1CC is a high performance epoxy anchoring system approved for use with threaded rod and reinforcing bar for cracked and uncracked concrete conditions, and internally threaded inserts in uncracked concrete.
- Suitable for core drilled installations in dry or water saturated concrete
- Multiple anchor types: threaded rod, rebar and internally threaded inserts
- UL Certified
$38.11
Availability:
In stock
( 91 Available )
Orders over $300 Ship Free!
SKU
17735
ULTRABOND HS-1CC - 22oz Cartridge (A22-HS1CC)
ULTRABOND HS-1CC is a two-component, 1:1 mix ratio structural anchoring epoxy for threaded rod and reinforcing bar in cracked or uncracked concrete. It is code compliant under ICC-ES ESR-4094 and assessed to ICC-ES AC308 and ACI 355.4. HS-1CC installs across a broad temperature range and is approved for dry, water-saturated, water-filled, and submerged conditions. It is certified to NSF/ANSI 61 and 372 for drinking water system components. :contentReference[oaicite:1]{index=1}
Looking for another size?
Key Features
- ICC-ES ESR-4094 evaluation report for cracked and uncracked concrete.
- Assessed to ICC-ES AC308 and ACI 355.4 for structural anchoring.
- IBC and IRC compliant with City of Los Angeles and Florida Building Code listings.
- NSF/ANSI 61 and NSF/ANSI 372 certifications for drinking water system components.
- Suitable for dry, water-saturated, water-filled, and submerged installations.
- Wide application temperature range for code work from 43°F to 110°F.
- Multiple anchoring elements including threaded rod, rebar, and internally threaded inserts.
- Made in the USA and approved or pending with many DOT agencies.
Applications
- Anchoring threaded rod and reinforcing bar in cracked or uncracked concrete using hammer-drilled or core-drilled holes.
- Vertical down, horizontal, inclined, and overhead anchor placements.
- Installations in dry, damp, water-filled, and underwater conditions with proper procedure.
- Potable water facilities requiring NSF/ANSI 61 and 372 compliance.
- Structural designs requiring performance under wind and seismic loading.
Technical Specifications
| Mix Ratio | 1:1 by volume |
| Consistency | Non-sag epoxy |
| Application Temperature Range | 43°F to 110°F for IBC/IRC work; 38°F to 125°F for transportation spec work |
| Working Time at 75°F | Approximately 16 minutes |
| Full Cure at 75°F | Approximately 7 hours |
| Compressive Yield Strength (7 day) | 14,480 psi (ASTM D695 Class C) |
| Heat Deflection Temperature | 148°F (ASTM D648) |
| Water Absorption | 0.02 percent at 24 hours (ASTM D570) |
| Approvals and Listings | ICC-ES ESR-4094; IBC and IRC; City of Los Angeles 2017; Florida Building Code 2017 and 2014; AASHTO M235 / ASTM C881 Type I, II, IV, V Grade 3 Class A, B, C; NSF/ANSI 61 and 372 |
| Hole Conditions | Dry, water-saturated, water-filled, and submerged |
| Packaging | 22 fl oz cartridge |
Frequently Asked Questions
Is HS-1CC code compliant for cracked concrete?
Yes. It carries ICC-ES ESR-4094 for cracked and uncracked concrete applications.
Can it be used in wet or underwater holes?
Yes. HS-1CC is suitable for dry, water-saturated, water-filled, and submerged conditions with the proper procedure.
What are typical working and cure times?
At 75°F the working time is about 16 minutes and full cure is about 7 hours.
Is it approved for potable water applications?
Yes. It is certified to NSF/ANSI 61 and 372 for drinking water system components.
What mix ratio does the cartridge use?
The system dispenses at 1:1 by volume for consistent proportioning.
Please complete your information below to login.