W. R. Meadows DUOGARD VOC is a dual-action form release in a 5 gallon pail for wood, steel, and coated plywood forms. A chemical film and an inert barrier help the form strip clean on exterior work.
W. R. Meadows DUOGARD VOC is a dual-action form release for wood, steel, aluminum, fiberglass, and coated plywood. It is used on exterior forms. A chemical film reacts with the paste and an inert barrier helps the form strip clean. This 5 gallon pail is furnished ready to spray. The film will not stain concrete. Typical coverage is about 600 to 1500 sq ft per gallon.
| Property | Value |
|---|---|
| Chemistry | Dual-action reactive plus inert barrier |
| Color | Amber |
| Coverage | 600 to 1500 sq ft/gal |
| Freezing point | Less than 10 F |
| Staining | None |
| Shelf life | 2 years at 40 to 90 F |
| Use | Exterior forms |
| Pack | 5 gallon pail |
| Dilution | Do not dilute |
| VOC | Complies with EPA, LADCO, SCAQMD, OTC |
Product documents: W. R. Meadows DUOGARD Data Sheet (PDF)
What forms is W. R. Meadows DUOGARD VOC used on?
Wood, steel, aluminum, fiberglass-reinforced, coated plywood, and fiber tubes. Wood faces need saturation before first use.
What coverage does W. R. Meadows DUOGARD VOC typically give?
About 600 to 1500 sq ft per gallon, depending on type and porosity of the form surface. A thin film is specified.
What pail size is W. R. Meadows DUOGARD VOC?
This listing is the 5 gallon pail. A 55 gallon drum is also packaged.
What mixing does W. R. Meadows DUOGARD VOC need?
None. The pail is ready to use. Do not dilute.
What form faces should stay off W. R. Meadows DUOGARD VOC?
Expanded polystyrene foam, rubber, latex or SBR, and plaster-coated forms. Over-application on approved forms also fails.
What equipment cleanup does W. R. Meadows DUOGARD VOC help?
Daily film on pavers, trucks, mixers, spreader-finishers, buggies, and chutes cuts concrete buildup and rust.
Please complete your information below to login.