Perminator provides the vapor barrier industry with a highly effective, economical choice for helping to reduce the penetration of moisture and water vapor through the slab into the structure, thereby helping to reduce fungus, mildew, and mold growth.
W.R. Meadows PERMINATOR 15 Mil is a polyolefin-based underslab vapor barrier designed to reduce moisture and water vapor transmission through concrete slabs into the structure. It also helps reduce fungus, mildew, mold growth, and radon gas intrusion while offering strong puncture resistance for normal jobsite traffic. This vapor barrier is used under concrete slabs, in crawlspaces, and as a protection course over waterproofing membranes where a low perm rating and durable sheet performance are required.
| Property | Value |
|---|---|
| Product Type | 15 mil underslab vapor barrier |
| Material | Polyolefin-based resin technology |
| Thickness | 15 mil |
| Roll Size per Data Sheet | 14 ft x 140 ft roll |
| Water Vapor Permeance | 0.0063 perms |
| Puncture Resistance | >3200 grams |
| Tensile Strength | 72 lb force/inch (12.61 kN/m) |
| Permeance After Wetting Out and Long-Term Soaking | 0.0052 perms |
| Permeance After Plastic Flow and Elevated Temperature | 0.0057 perms |
| Permeance After Low Temperature and Flexibility Testing | 0.0052 perms |
| Permeance After Soil Exposure Deterioration Testing | 0.0052 perms |
| Radon Transmittance | 8.7 x 10-9 m/s |
| Radon Coefficient | 3.3 x 10-12 m²/s |
| Standards | Meets or exceeds ASTM E1745 Class A, B, and C |
| ACI Guidance | Meets ACI 302.2R suggested 0.01 perm requirement for slabs receiving moisture-sensitive flooring |
| VOC Content | 0 g/L |
What is W.R. Meadows PERMINATOR 15 Mil used for?
It is primarily used as an underslab vapor barrier below concrete slabs. It can also be used in crawlspaces and as a protection course for waterproofing membranes.
Does PERMINATOR help reduce radon and moisture intrusion?
Yes. It is designed to help reduce water vapor transmission through the slab and also helps reduce radon gas from entering the structure.
How are seams sealed during installation?
Joints and seams should be overlapped 6 inches and taped with 4 inch wide PERMINATOR TAPE.
Does the slab need gravel, fill, or sand over the membrane?
No. The data sheet states that PERMINATOR is installed over tamped grade or compacted fill and does not need to be overlaid with gravel or sand.
Can penetrations and damaged areas be repaired?
Yes. Pipe and rebar penetrations can be sealed with collars and tape, and damaged areas can be patched with a larger piece of PERMINATOR overlapped at least 6 inches in all directions and taped at the edges.
Does PERMINATOR eliminate the need for drainage?
No. The manufacturer states that it does not negate the need for hydrostatic pressure relief, and a drain tile system may still be required.
Please complete your information below to login.