Parcel Orders over $300 Ship Free.
Stratarock Thin Pour Epoxy .24 cu ft unit
Stratarock Thin Pour Epoxy Grout is a two-component high-strength industrial epoxy grout in a 25 lb kit that yields 0.24 cu ft, used for grouting, re-grouting, and anchoring equipment in tight clearances. Fast set allows operation in as little as 6 hours after installation.
- Clearances from 1/8 inch to 1 inch
- USDA incidental food contact is allowed
- Negligible shrinkage under machine bases
$249.26
Availability:
In stock
( 26 Available )
Stratarock Thin Pour Epoxy
Stratarock Thin Pour Epoxy Grout is a two-component high-strength industrial epoxy grout in a 25 lb kit that yields 0.24 cu ft. It is used for grouting, re-grouting, and anchoring equipment in tight clearances from 1/8 inch to 1 inch. Fast set allows operation in as little as 6 hours after installation. USDA incidental food contact is allowed on those placements.
Key Features
- Two-component high-strength industrial epoxy grout
- Superior flow under machine bases and sole plates
- Used in tight clearances from 1/8 inch to 1 inch
- Operation in as little as 6 hours after installation
- USDA approved for incidental food contact
- Resists abrasion, vibration, impact, and chemicals
Applications
- Equipment bases in tight clearances
- Tower and turbine bases
- Precision alignment of rotating equipment
- Crane rails and chemical exposure
Technical Specifications
| Property | Value |
|---|---|
| Compressive strength, 24 hours | 13,000 psi |
| Compressive strength, full cure | 17,000 psi |
| Tensile strength | 4,260 psi |
| Flexural strength | 6,800 psi |
| Viscosity, mixed | 2,100 cps |
| Pot life | 15 minutes at 77 F |
| Cure, minimum | 6 hours at 77 F |
| Clearance | 1/8 inch to 1 inch |
| Yield | 0.24 cu ft from a 25 lb kit |
| Shelf life | 1 year unopened at 75 F |
Product documents: Stratarock Thin Pour Epoxy Grout Data Sheet (PDF)
Frequently Asked Questions
What tight-clearance work uses Stratarock Thin Pour Epoxy?
Grouting, re-grouting, and anchoring of heavy equipment in 1/8 inch to 1 inch clearances. Typical placements are equipment bases, tower and turbine bases, precision alignment of rotating equipment, crane rails, and chemical exposure.
What size is Stratarock Thin Pour Epoxy?
The kit is 25 lb and yields 0.24 cu ft. Part A is resin and Part B is hardener.
What return-to-service wait does Stratarock Thin Pour Epoxy have?
Quick setting and special curing allow operation in as little as 6 hours after installation. Minimum cure is 6 hours at 77 F. Full cure is 5 to 7 days. Surface temperatures of 60 F to 90 F are recommended, with material between 70 F and 90 F before placement.
What clearance does Stratarock Thin Pour Epoxy have?
Level the machine with 1/8 inch to 1 inch of space between the machine base and the foundation. The grout flows into cracks as small as 0.002 inch.
What pot life does Stratarock Thin Pour Epoxy have?
Typical pot life is 15 minutes at 77 F. Mixed viscosity is 2,100 cps. Mix only when ready to pour.
What full-cure compressive strength does Stratarock Thin Pour Epoxy have?
Typical laboratory full-cure compressive strength is 17,000 psi (ASTM C-579). Twenty-four-hour compressive strength is 13,000 psi. Tensile strength is 4,260 psi. Flexural strength is 6,800 psi. Expect reasonable variation under field conditions.
Please complete your information below to login.