Parcel Orders over $300 Ship Free.
Sika Greenstreak Hydrotite 32.8' Expandable Waterstop CJ-0725-3KADH
Sika Hydrotite CJ-0725-3KADH is a hydrophilic modified chloroprene strip waterstop in a 32.8 ft roll. It is placed on site-formed joints in tanks, tunnels, and pipe penetrations that need a peel-and-stick hydrophilic seal.
- Peel-and-stick adhesive backing speeds install
- Expands up to 8 times in water to seal the joint
- Expansion-delay coating lets concrete set before swell
$392.30
Availability:
Out of stock
Sika Hydrotite CJ-0725-3KADH
Sika Hydrotite CJ-0725-3KADH is a hydrophilic modified chloroprene strip waterstop with peel-and-stick adhesive backing. This 32.8 ft roll (part 419019) is for site-formed joints in water and wastewater plants, tunnels, tanks, and pipe penetrations. The co-extruded 7 mm by 25 mm profile expands in water after a delay coating, and all CJ profiles meet NSF/ANSI 61.
Key Features
- Non-bentonite modified chloroprene hydrophilic waterstop
- CJ-0725-3KADH profile approximately 7 mm by 25 mm with adhesive back
- 32.8 ft (10 m) roll, part 419019
- Expands up to eight times original volume in water
- Expansion-delay coating before swell
- Meets NSF/ANSI 61 for potable-water contact
Applications
- Water and wastewater treatment facilities
- Tunnels, culverts, dams, locks, canals, and reservoirs
- Pipe penetrations
- Storage tanks, swimming pools, retaining walls, and foundations
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | Sika Hydrotite CJ-0725-3KADH |
| Part no. | 419019 |
| Unit | 32.8 ft (10 m) roll |
| Profile size | Approximately 7 mm x 25 mm |
| Adhesive back | Yes, peel-and-stick |
| Volume change | Up to 8x in water |
| Hydrostatic head | 150 ft for most profiles |
| Potable water | Meets NSF/ANSI 61 |
| Hydrophilic Shore A | Approximately 52 |
Product documents: Sika Hydrotite CJ Product Data Sheet (PDF)
Frequently Asked Questions
What size is Sika Hydrotite CJ-0725-3KADH?
The roll is 32.8 ft (10 m), part 419019.
What profile dimensions does Sika Hydrotite CJ-0725-3KADH have?
Approximately 7 mm by 25 mm (0.28 inch by 0.98 inch) with peel-and-stick adhesive backing.
What adhesive backing does Sika Hydrotite CJ-0725-3KADH have?
Peel-and-stick adhesive back. Remove the release paper and press the profile to clean, dust-free concrete.
What pipe-penetration work uses Sika Hydrotite CJ-0725-3KADH?
Pipe penetrations, plus water and wastewater plants, tunnels, culverts, tanks, dams, and slabs on grade.
What hydrostatic head does Sika Hydrotite CJ-0725-3KADH withstand?
150 ft of head for most profiles.
What chloroprene chemistry does Sika Hydrotite CJ-0725-3KADH use?
Non-bentonite modified chloroprene rubber, co-extruded with hydrophilic (blue) and non-hydrophilic (black) rubber.
Please complete your information below to login.