Parcel Orders over $300 Ship Free.
Euclid Level Top Polish 50lb Bag
Euclid Level Top Polish is a polymer-modified, micro-fiber self-leveling overlay for new or worn concrete that can be ground to a high gloss in 24 hours, or run as an underlayment.
- Polish in 24 hours or use as underlayment
- Pourable and pumpable; 20 to 30 minute working time
- Accepts decorative aggregate for seeded finishes
$46.15
Euclid Level Top Polish Self-Leveling Overlay, 50 lb
Euclid Level Top Polish is a polymer-modified, micro-fiber enhanced, self-leveling cementitious resurfacing compound for new or worn concrete. It is used to level concrete substrates and as a decorative polished wearing surface on retail, commercial, and residential floors. The overlay has high early strength for fast-track work, excellent adhesion and toughness, and can be integrally colored or dyed.
Key Features
- Polymer modified
- Micro-fiber enhanced
- Self-leveling overlay
- High early strength
- Compatible with liquid densifiers
- Integrally colored or dyed
Applications
- Leveling concrete substrates.
- Decorative polished wearing surfaces.
- Retail, commercial, and residential floors.
Technical Specifications
| Property | Value |
|---|---|
| 4-hour compressive | 2,000 psi |
| 24-hour compressive | 4,800 psi |
| 7-day compressive | 5,700 psi |
| 28-day compressive | 7,000 psi |
| Initial set | 50 to 80 minutes |
| Final set | 100 to 180 minutes |
| Working time | 20 to 30 minutes |
| Dry polish | 24 hours |
| Application thickness | polish min 3/8 in; topping min 1/4 in; underlayment min 1/8 in |
| Yield | 0.46 ft³ per 50 lb |
Documents
Level Top Polish Technical Data Sheet
Frequently Asked Questions
Where is Euclid Level Top Polish used as a wearing surface?
Euclid Level Top Polish is used to level concrete substrates and as a decorative polished wearing surface. Primary applications include fast-track work and retail, commercial, and residential floors.
When is Euclid Level Top Polish ready to dry polish?
After the overlay has cured for at least 24 hours, the surface can be dry polished to a high-gloss finish using standard concrete polishing practices. Typical laboratory value. Expect reasonable variation under field conditions.
What 4-hour compressive result does Euclid Level Top Polish show?
Typical laboratory value is 2,000 psi at 4 hours (ASTM C109). 24-hour compressive strength is 4,800 psi; 7-day is 5,700 psi; 28-day is 7,000 psi. Expect reasonable variation under field conditions.
What polish thickness does Euclid Level Top Polish cover?
Minimum placement thickness for polishing applications is 3/8 inch. Minimum for non-polished topping applications is 1/4 inch. Minimum for non-polished underlayment applications is 1/8 inch. Maximum non-extended placement thickness is 2 inches neat.
What stain-or-coat window does Euclid Level Top Polish hold?
Stain or coat time is 12 to 24 hours. Typical laboratory value. Expect reasonable variation under field conditions.
What Vicat set range does Euclid Level Top Polish show?
Initial set is 50 to 80 minutes (ASTM C191). Final set is 100 to 180 minutes. Typical laboratory values. Expect reasonable variation under field conditions.
Please complete your information below to login.