Parcel Orders over $300 Ship Free.
Euclid Euco QWIKstitch 2 Gallon
Euclid Euco QWIKstitch is a two-component hybrid urethane repair liquid used to mend cracks in concrete, repair spalled joints and repair damaged or uneven concrete surfaces.
- Ultra-low viscosity
- Very fast cure time
- Low VOC, no solvent odor
$425.38
Availability:
Out of stock
Ships via LTL
SKU
18711
Euclid EUCO QWIKstitch 2 Gallon Bulk Unit
EUCO QWIKstitch is a two-component hybrid urethane repair liquid used to mend cracks in concrete, repair spalled joints, and repair damaged or uneven concrete surfaces. It is an ultra-low viscosity material formulated to penetrate deep into cracks and cure fast. Concrete repaired with EUCO QWIKstitch can be opened to heavy traffic in less than one hour. EUCO QWIKstitch can also be mixed with clean, oven-dried silica sand to create a tough mortar for pop-outs and spalls.
Key Features
- Ultra-low viscosity for deep penetration into cracks.
- Very fast cure time for quick return to service.
- Traffic ready for heavy traffic in less than one hour.
- Wide application temperature range: 0 to 110°F (-18 to 43°C).
- Low VOC and no solvent odor.
- Can be mixed with clean, oven-dried silica sand to place a repair mortar.
- 2 gallon units can be pigmented with Euclid universal color packs (33 colors available).
- Needle tip static mixers are available for neatly injecting very narrow cracks.
Applications
- Cracked concrete surfaces, interior and exterior.
- Spalled floor joints.
- Repair of pop-outs and delaminations on floors.
- Crack injection and crack mending where low viscosity is needed.
- Mortar repairs when mixed with kiln-dried silica sand.
Technical Specifications:
| Property | Value |
|---|---|
| Product Type | Two-component hybrid urethane repair liquid |
| Packaging (this product) | 2 gal (7.6 L) bulk unit (Code: 693Q 95) |
| Approximate Yield | 462 in3 (7570 cm3) per 2 gallon bulk unit |
| Mix Ratio | Part A to Part B: 1:1 by volume |
| Sand to Mixed Liquid Ratio | 2:1 by volume |
| Viscosity | Part A 60 cP; Part B 60 cP; Mixed 60 cP |
| Gel Time at 75°F (24°C) | 2 to 3 minutes |
| Tack Free Time at 75°F (24°C) | 10 minutes |
| VOC Content | 19 g/L |
| Hardness | Shore D 70 (ASTM D2240) |
| Tensile Strength (7 days) | 3,410 psi (23.5 MPa) (ASTM D638) |
| Tensile Elongation | 16.3 (ASTM D638) |
| Compressive Strength | 4,610 psi at 1.5 hours; 5,050 psi at 24 hours (ASTM D695) |
| Bond Strength | 1,880 psi (13 MPa) (ASTM C882) |
| Water Absorption | 0.25% (ASTM D570) |
| Application Temperature Range | 0 to 110°F (-18 to 43°C) |
| Shelf Life | 1 year in original, unopened package |
Frequently Asked Questions
How quickly can repaired concrete be reopened to traffic?
Concrete repaired with EUCO QWIKstitch can be opened to heavy traffic in less than one hour. Tack free time at 75°F (24°C) is 10 minutes.
What is the mix ratio for the bulk unit?
Mix Part A to Part B at 1:1 by volume. When making mortar, use 2 parts clean, oven-dried silica sand to 1 part mixed liquid by volume.
Can it be used to repair spalls and pop-outs?
Yes. It can be mixed with kiln-dried medium grade (30 mesh) silica sand to create a mortar suitable for repairs 1/2 inch to 3 inches (1.3 to 7.6 cm) in thickness per lift.
What temperature range can it be applied in?
Application temperature range is 0 to 110°F (-18 to 43°C). Condition material to 60 to 80°F (16 to 27°C) before use when possible.
Does the neat material hold color in sunlight?
Neat EUCO QWIKstitch is not UV stable and will discolor when exposed to sunlight or interior UV light.
How do I clean tools before it cures?
Tools and equipment can be cleaned before cure with MEK or acetone.
Please complete your information below to login.