Euclid Duralflex Fastpatch .4 CF Kit

Euclid Duralflex Fastpatch is a three-component, 100% solids, low-modulus, moisture-insensitive epoxy repair kit for worn high-use floors. Resin, hardener, and non-dusting aggregate are pre-measured in the pail.

Place 1/4 to 3 inches with no primer
Initial cure about 3 to 4 hours at 1/2 in
Place as low as 40 F; warehouse floors, docks, and parking decks

$188.92

Drop Shipped

Details

Euclid Duralflex Fastpatch Epoxy Repair Kit, 0.4 ft³ Kit

Euclid Duralflex Fastpatch is a three-component, 100% solids, low-modulus epoxy repair kit. It is used on warehouse floors, loading docks, mechanical rooms, parking decks, bridge nosings, runways, and airfield in-pavement lighting. The pre-measured resin, hardener, and non-dusting aggregate are supplied in a 0.4 ft³ kit. The low-modulus binder is for impact and thermal movement.

Key Features

Pre-measured three-component epoxy mortar kit
Low-modulus binder for impact and thermal movement
No primer; moisture-insensitive
Rapid cure that minimizes downtime
May be applied as low as 40 F
Non-dusting aggregate

Applications

Warehouse floors, loading docks, and mechanical rooms.
Parking decks, ramps, and bridge nosings.
Runways and airfield in-pavement lighting.
Food storage areas and polymer concrete patches.

Technical Specifications

Property	Value
ASTM C881, Parts A and B	Type III, Grade 1, Classes A and B
Pot life	20 to 30 minutes
Initial cure, 1/2 in	3 to 4 hours
Tensile strength, ASTM D638	2,700 psi
Tensile elongation	45%
Hardness Shore D, ASTM D2240	85
Water absorption, 24 hours	< 0.5%
Compressive strength, 6 hours at 75 F	4,000 psi
Application thickness	0.25 to 3 in
Application temperature	as low as 40 F

Documents

Duralflex Fastpatch Technical Data Sheet

Frequently Asked Questions

Where is Euclid Duralflex Fastpatch used?
Euclid Duralflex Fastpatch is used on warehouse floors, loading docks, mechanical rooms, parking decks and ramps, bridge decks and nosings, runways, airfield in-pavement lighting, and food storage areas.

How soon does Euclid Duralflex Fastpatch reach initial cure at 1/2 in?
Initial cure at 1/2 in thickness is about 3 to 4 hours. Typical laboratory compressive strength at 75 F is 1,400 psi at 4 hours and 4,000 psi at 6 hours (ASTM C109M). Expect reasonable variation under field conditions.

What primer does Euclid Duralflex Fastpatch need?
Euclid Duralflex Fastpatch does not need a primer. The moisture-insensitive epoxy is placed on a properly prepared dry surface.

What thickness is Euclid Duralflex Fastpatch placed at?
Placement thickness is 0.25 to 3 inches. Coverage per 0.4 ft³ kit is about 19.2 ft² at 0.25 in and 1.6 ft² at 3 in.

What pot life does Euclid Duralflex Fastpatch have?
Typical laboratory pot life is 20 to 30 minutes. Expect reasonable variation under field conditions.

What 6-hour compressive strength does Euclid Duralflex Fastpatch show at 75 F?
Typical laboratory compressive strength is 4,000 psi at 6 hours and 75 F (ASTM C109M). Seven-day compressive strength at 75 F is 9,800 psi. Expect reasonable variation under field conditions.

More Information