Parcel Orders over $300 Ship Free.
Dayton Superior Sure Anchor I J51 250ml Cartridge 100907
Dayton Superior Sure Anchor I J51 is a two-component, moisture-tolerant, 100% solids, high-modulus epoxy gel in a 250 ml cartridge for anchoring bolts, dowels, and rebar in concrete. Non-sag 1:1 mix holds in vertical and horizontal holes, and sets injection ports before grouting.
- Gel time is 12 minutes at 73 F
- Cartridge mix is 1:1 at the nozzle
- Moisture-tolerant mix is used on damp, sound concrete
$369.84
Availability:
Out of stock
Dayton Superior Sure Anchor I J51
Dayton Superior Sure Anchor I J51 is a two-component, moisture-tolerant, 100% solids, high-modulus epoxy gel in a 250 ml cartridge for anchoring bolts, dowels, and rebar in concrete. Non-sag 1:1 mix holds in vertical and horizontal holes, and sets injection ports before grouting. Product code is 100907. Gel time is 12 minutes at 73 F. Cartridge mix is 1:1 at the nozzle.
Key Features
- High-modulus epoxy gel is used to anchor bolts, dowels, rebar, and threaded rod
- Non-sag 1:1 mix holds in vertical and horizontal holes
- Cartridge mix is 1:1 at the nozzle
- Gel time is 12 minutes at 73 F
- Moisture-tolerant mix is used on damp, sound concrete
Applications
- Bolts, dowels, and rebar that need a non-sag epoxy gel
- Vertical and horizontal structural bonds and patches
- Cracks that need a port seal before injection grouting
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | 100% solids high-modulus epoxy gel |
| Pack | 250 ml (8.5 oz) cartridge |
| Product code | 100907 |
| Mix ratio | 1:1 by volume |
| Gel time 60 g at 73 F | 12 minutes |
| Gel time at 50 F | 32 minutes |
| Full cure at 70 F | 24 hours |
| ASTM C881 | Type I, II, IV, V Grade 3 Class B and C, except gel time |
| VOC | 0 g/L |
| Place temp | 40 F and above |
Product documents: Dayton Superior Sure Anchor I J51 Data Sheet (PDF)
Frequently Asked Questions
What anchors is Dayton Superior Sure Anchor I J51 used on?
Bolts, dowels, reinforcing steel, and threaded rod in concrete.
What cartridge size is Dayton Superior Sure Anchor I J51?
The pack is a 250 ml (8.5 oz) cartridge, code 100907. Mix 1:1 at the nozzle.
What gel time does Dayton Superior Sure Anchor I J51 have?
12 minutes at 73 F on a 60 gram mass. 32 minutes at 50 F.
What mix ratio does Dayton Superior Sure Anchor I J51 use?
1:1 by volume at the mixing nozzle.
What place temperature does Dayton Superior Sure Anchor I J51 have?
40 F and above. Condition material to 65 F to 85 F before use.
What cure time does Dayton Superior Sure Anchor I J51 need?
Full cure is 24 hours at 70 F. Anchors stay unloaded until that wait is over.
Please complete your information below to login.