Parcel Orders over $300 Ship Free.
Dayton Sure Anchor J50 600ml Cartridge 307449
Dayton Superior Sure Anchor J50 is a moisture-tolerant 1:1 epoxy gel in a 600 ml cartridge for anchoring bolts, dowels, and rebar in concrete. The non-sag gel also seals cracks and sets injection ports on vertical and horizontal work.
- Non-sag 1:1 gel holds bolts, dowels, and rebar in concrete
- Gel time is about 24 minutes at 73 F
- This listing is a 600 ml cartridge
$40.43
Availability:
Out of stock
Dayton Superior Sure Anchor J50
Dayton Superior Sure Anchor J50 is a two-component, 100% solids, moisture-tolerant, high-modulus epoxy gel. It is used to anchor bolts, dowels, and reinforcing steel in concrete, and to seal cracks and set injection ports. This listing is a 600 ml cartridge. Gel time is about 24 minutes at 73 F in a 60 gram mass. The mix is 1:1 and the gel is non-sag.
Key Features
- Moisture-tolerant 100% solids gel holds anchors in concrete
- Non-sag Grade 3 consistency stays on vertical faces
- 1:1 mix meets ASTM C881 Types I, II, IV, and V
- Gel time is about 24 minutes at 73 F
- VOC is 0 g/L
Applications
- Bolts, dowels, and rebar that need a non-sag epoxy gel
- Vertical and horizontal structural bonding and patching
- Crack sealing and injection-port setting before grouting
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | 100% solids high-modulus epoxy gel |
| ASTM C881 | Types I, II, IV, V Grade 3 Classes B and C |
| Mix ratio | 1:1 by volume |
| Gel time 73 F | 24 minutes (60 g mass) |
| Compressive 7 day 60 F | 15,000 psi |
| Bond 14 day 60 F | 3,300 psi |
| VOC | 0 g/L |
| Pack | 600 ml cartridge |
| Product code | 307449 |
| Min temperature | 40 F |
Product documents: Dayton Superior Sure Anchor J50 Data Sheet (PDF)
Frequently Asked Questions
What anchors is Dayton Superior Sure Anchor J50 used for?
Bolts, dowels, reinforcing steel, and threaded rod in concrete. The same gel seals cracks and sets injection ports.
What cartridge size is Dayton Superior Sure Anchor J50?
This listing is a 600 ml cartridge, code 307449.
What gel time does Dayton Superior Sure Anchor J50 have?
About 24 minutes at 73 F in a 60 gram mass. At 50 F the gel time is about 68 minutes.
What ASTM C881 class does Dayton Superior Sure Anchor J50 meet?
Types I, II, IV, and V, Grade 3, Classes B and C, plus AASHTO M235.
What consistency does Dayton Superior Sure Anchor J50 have?
Non-sag gel, mixed 1:1 by volume. Mixed color is gray.
What temperature does Dayton Superior Sure Anchor J50 need?
Air and surface must be 40 F or above. Condition cartridges before use.
Please complete your information below to login.