Parcel Orders over $300 Ship Free.
Dayton Superior Pro-Poxy 300 Fast 600ml Cartridge 140204
Dayton Superior Pro-Poxy 300 Fast is a 100% solids, high-modulus, non-sag epoxy gel in a 600 ml cartridge for anchoring steel in concrete. Moisture-tolerant 1:1 mix holds bolts, dowels, and rebar on vertical, horizontal, and overhead holes.
- Gel time is approximately 12 minutes at 73 F
- Crack faces are sealed and injection ports are set before grouting
- Full cure is approximately 24 hours at 70 F
$40.83
Dayton Superior Pro-Poxy 300 Fast
Dayton Superior Pro-Poxy 300 Fast is a 100% solids, high-modulus, non-sag epoxy gel in a 600 ml cartridge for anchoring steel in concrete. Moisture-tolerant 1:1 mix holds bolts, dowels, and rebar on vertical, horizontal, and overhead holes. Product code is 140204. Gel time is approximately 12 minutes at 73 F. Full cure is approximately 24 hours at 70 F. Holes are cleaned of dust and standing water first.
Key Features
- Non-sag epoxy gel is used to anchor bolts, dowels, rebar, and threaded rod
- 1:1 mix stays moisture tolerant on damp, sound concrete
- Non-sag gel holds on vertical and overhead holes
- Gel time is approximately 12 minutes at 73 F
- Crack faces are sealed and injection ports are set before grouting
Applications
- Bolts, dowels, and rebar that need a fast-set non-sag gel
- Vertical and overhead holes that need a gel that holds
- Cracks that need a port seal before injection grouting
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | 100% solids high-modulus non-sag epoxy gel |
| Pack | 600 ml (20 oz) cartridge |
| Product code | 140204 |
| Mix ratio | 1:1 by volume |
| Gel time 60 g at 73 F | Approximately 12 minutes |
| Gel time at 50 F | Approximately 32 minutes |
| Full cure at 70 F | Approximately 24 hours |
| ASTM C881 | Type I, II, IV, V Grade 3 Class B and C, except gel time |
| VOC | 0 g/L |
| Place temp | 40 F and above |
| Compressive 7 day at 60 F | 12,500 psi |
Product documents: Dayton Superior Pro-Poxy 300 Fast Data Sheet (PDF)
Frequently Asked Questions
What anchors is Dayton Superior Pro-Poxy 300 Fast used on?
Bolts, dowels, reinforcing steel, and threaded rod in concrete. Vertical, horizontal, and overhead holes.
What cartridge size is Dayton Superior Pro-Poxy 300 Fast?
This listing is a 600 ml (20 oz) cartridge, code 140204. Mix 1:1 by volume.
What gel time does Dayton Superior Pro-Poxy 300 Fast have?
Approximately 12 minutes at 73 F on a 60 gram mass. Approximately 9 minutes at 70 F on the substrate chart.
What cure time does Dayton Superior Pro-Poxy 300 Fast need?
Full cure is approximately 24 hours at 70 F. Anchors stay unloaded until that wait is over.
What moisture does Dayton Superior Pro-Poxy 300 Fast tolerate?
Damp, sound concrete. Standing water and dust are blown out of the hole first.
What crack work is Dayton Superior Pro-Poxy 300 Fast used on?
Sealing crack faces and setting injection ports before grouting.
Please complete your information below to login.