Parcel Orders over $300 Ship Free.
Chemlink Pro Pack Urethane Sealant 2 Gallon Kit Black F1000
ChemLink Pro Pack is a two-component RTV urethane pourable sealant for ChemCurb penetration seals and pitch pans on low-slope roofs. It is 100% solids, self-leveling, and cures to a tough rubber that resists weather, water, ice, oils, and fuels.
- Fills ChemCurb penetration seals and pitch pans
- Self-leveling, 100% solids, will not shrink
- Resists weather, water, ice, oils, and fuels
$183.70
Drop Shipped
ChemLink Pro Pack Two-Component Urethane Pourable Sealant, 2 Gallon Black
ChemLink Pro Pack is a two-component RTV urethane pourable sealant for ChemCurb penetration seals, pitch pans, and other horizontal self-leveling work on low-slope roofs. Mixed material is 100% solids, self-leveling, and cures to a tough rubber with no visible shrinkage. It resists weather, water, ice, oils, and fuels. Apply at 40°F and above, and keep kits at room temperature 24 hours before mixing. TPO needs ChemLink Low VOC EPDM/TPO Primer before Pro Pack.
Key Features
- Two-component RTV urethane that mixes to a uniform black, self-leveling pour
- 100% solids with no solvents, asphalt, or coal tar, so it will not shrink
- Cures to a tough rubber that stays flexible in cold weather
- Unlimited cure depth for ChemCurb fills and pitch pans
- Thermosetting, so it will not creep at elevated temperatures
- Apply at 40°F and above; hold the kit at room temperature 24 hours before mixing
- Made in the USA
Applications
- Fill warranted ChemCurb penetration seals and pitch pans on low-slope roofs.
- Horizontal self-leveling waterproofing.
- Night sealant and transitions between roof types.
- Bonding and waterproofing EPS, Styrofoam, and urethane foam insulation.
- Cracks and expansion joints in concrete and asphalt pavement (embed polyester, then top dress).
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Chem Link (SOPREMA) |
| Product | PRO PACK urethane pourable sealant |
| Part number | F1000 |
| Mix ratio | 7:1 by volume (Part A : Part B) |
| Color / grade | Black, self-leveling |
| Packaging | 2 gallon kit with hardener, stir paddle, and gloves |
| Pot life | 90 ± 45 min at 70°F (21°C) |
| Shore A hardness | 41 to 51 (ASTM C661) |
| Tensile strength | 126 psi (ASTM D412) |
| Elongation at break | 75 to 100% (ASTM D412) |
| VOC content | Less than 7 g/L at 240°F (ASTM D2369, EPA Method 24) |
| TDS revision | DS1000, 08/04/20 (current SOPREMA PDS - PROPACK) |
Product documents: PDS - PROPACK (PDF) | SDS - Pro Pack Part A (PDF) | SDS - Pro Pack Part B (PDF)
Frequently Asked Questions
Is ChemLink Pro Pack for ChemCurb penetration seals and pitch pans?
Yes. ChemLink Pro Pack is used to fill warranted ChemCurb penetration seals and pitch pans on low-slope roofs.
Is ChemLink Pro Pack a self-leveling two-component urethane?
Yes. ChemLink Pro Pack is a two-component RTV urethane pourable sealant that cures to a tough rubber mass.
Can ChemLink Pro Pack be used above grade and below grade?
Yes. ChemLink Pro Pack can be used above or below grade.
Will ChemLink Pro Pack shrink after application?
No. ChemLink Pro Pack is 100% solids, has no solvents, and will not shrink after application.
Is ChemLink Pro Pack compatible with EPS foam insulation?
Yes. ChemLink Pro Pack has excellent adhesion to Styrofoam, EPS, and urethane foam insulation.
Can ChemLink Pro Pack be used as a night sealant on low-slope roofs?
Yes. ChemLink Pro Pack is also a waterproof sealant for bridging transitions between different types of roof construction and as a night sealant.
Please complete your information below to login.