Parcel Orders over $300 Ship Free.
Adhesives Technology Ultrabond EPX-3CC 9oz
High performance epoxy anchoring system. It's approved for use in cartridges or bulk dispensing systems for installation of threaded rod and reinforcing bar in cracked or uncracked concrete conditions.
- Dry, Wet and Water Filled Use
- Vertical, Overhead and Horizontal Applications
- Simple 1:1 Mix Ratio
$28.52
Availability:
In stock
SKU
19832
ULTRABOND EPX-3CC – 9oz Cartridge
ULTRABOND EPX-3CC is a high-strength, two-component anchoring epoxy designed for threaded rod and reinforcing bar in cracked or uncracked concrete. With a 1:1 mix ratio by volume, this code-compliant system meets ICC-ES AC308 and ACI 355.4 requirements, and is evaluated under ICC-ES ESR-4533. Approved for use in dry, water-saturated, and water-filled conditions, it offers consistent bond strength in vertical, horizontal, and overhead applications. Certified to NSF/ANSI 61 and 372 for potable water systems, EPX-3CC is also DOT-approved nationwide:contentReference[oaicite:1]{index=1}.
Looking for another size?
Key Features
- ICC-ES ESR-4533 code compliant for cracked and uncracked concrete.
- Assessed under ICC-ES AC308 and ACI 355.4 for anchoring performance.
- Certified to NSF/ANSI 61 and 372 for potable water systems.
- Approved for dry, water-saturated, and water-filled installations.
- Applicable in vertical, horizontal, inclined, and overhead anchor placements.
- Working temperature range: 48°F to 108°F (9°C to 42°C).
- Complies with AASHTO M235 / ASTM C881 Type I, II, IV & V, Grade 3, Class B & C.
- DOT approvals in multiple states; made in the USA.
Applications
- Anchoring threaded rod and reinforcing bar into cracked or uncracked concrete.
- Core-drilled and hammer-drilled installations.
- Anchoring in damp or submerged holes where reliability is critical.
- Structural applications subject to seismic and wind loading.
- Potable water facility installations requiring NSF/ANSI compliance.
Technical Specifications
| Mix Ratio | 1:1 by volume |
| Compressive Yield Strength (7 days) | 14,482 psi (99.8 MPa) |
| Bond Strength (Hardened to Hardened, 2 days) | 2,812 psi (19.4 MPa) |
| Tensile Strength (7 days) | 6,000 psi (41.4 MPa) |
| Heat Deflection Temperature | 135°F (57°C) |
| Water Absorption (24 hr) | 0.05% |
| Application Temperature Range | 48°F to 108°F (9°C to 42°C) |
| Packaging | 9oz cartridge |
Frequently Asked Questions
Is EPX-3CC approved for cracked concrete?
Yes, it is ICC-ES ESR-4533 compliant for both cracked and uncracked concrete applications.
Can it be used in wet or submerged holes?
Yes, EPX-3CC is approved for dry, damp, and submerged conditions:contentReference[oaicite:2]{index=2}.
Is it safe for potable water systems?
Yes, EPX-3CC is certified under NSF/ANSI 61 and 372 for drinking water system components.
What cure time should I expect?
At 75°F, EPX-3CC reaches full cure in approximately 24 hours, with working time varying by temperature.
What sizes are available?
EPX-3CC is available in 9oz, 22oz, and 53oz cartridges, as well as bulk packaging.
Please complete your information below to login.