Parcel Orders over $300 Ship Free.
Adhesives Technology Ultrabond 1300 2 Gal B2G-1300
Ultrabond 1300 is Adhesives Technology's high-modulus epoxy for anchoring and doweling in uncracked concrete. It is non-sag, moisture insensitive, and made for bulk dispensing pumps.
- High modulus
- Non-sag
- Moisture insensitive
$239.24
Drop Shipped
Adhesives Technology ULTRABOND 1300 High-Strength Doweling Epoxy, 2 Gallon Kit
ULTRABOND 1300 is a two-component, 1:1 non-sag epoxy for anchoring and doweling threaded rod and rebar in uncracked concrete. It is moisture insensitive in damp holes, non-abrasive in bulk pumps, and places from 40°F to 110°F. Typical work includes pavement dowel and tie bars, raised markers, and bonding fresh or hardened concrete. Working time is about 16 minutes at 75°F, with a 24-hour full cure. Also available as the 9 oz cartridge, the 53 oz cartridge, and the 1 gallon kit.
Looking for another size?
Key Features
- Anchors threaded rod and rebar in uncracked concrete
- Moisture insensitive for dry or damp holes
- Non-sag for vertical-down and horizontal placements
- Non-abrasive mix for bulk dispensing pumps
- Pavement dowel and tie bars, raised markers, and concrete-to-concrete bonding
- Simple 1:1 mix that cures gray
Applications
- Threaded rod and rebar dowels in uncracked concrete
- Dowel bars and tie bars for full-depth pavement repairs
- Raised pavement markers on concrete or asphalt
- Bonding fresh or hardened concrete to hardened concrete
- Vertical-down and horizontal installations
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | Two-component epoxy, 1:1 by volume |
| Mixed color | Gray (Part A white, Part B dark gray) |
| Consistency | Non-sag, high modulus, non-abrasive |
| Compressive yield | 12,300 psi at 7 days, 75°F (ASTM D695) |
| Compressive modulus | 572,200 psi at 7 days, 75°F (ASTM D695) |
| Bond strength H to H | 2,670 psi at 2 days, 75°F (ASTM C882) |
| Working / full cure | Gel 35 min at 75°F (60 g); full cure 24 hr at 75°F |
| Application temperature | 40 to 110°F (4 to 43°C) |
| ASTM C881-20 / AASHTO M235 | Type I, II, IV and V, Grade 3, Class B and C |
| Shelf life | 24 months (unopened, 40 to 95°F) |
| Packaging | 2 gallon (7.6 L) kit, B2G-1300 |
Product documents: ULTRABOND 1300 Technical Data Sheet (PDF) | ULTRABOND 1300 Safety Data Sheet (PDF)
Frequently Asked Questions
Does Ultrabond 1300 stay usable on night pavement work where odor matters?
Yes. Ultrabond 1300 is a low-odor non-sag epoxy that crews use on night pavement repairs when a solvent smell would be a problem. Same 1300 chemistry as the cartridges, fed from bulk when the job is long.
Can Ultrabond 1300 grout dowel bars on a full-depth pavement repair?
Yes. Ultrabond 1300 is used to grout dowel bars on full-depth pavement repairs. Bulk feed is the usual way to keep a long dowel run moving.
Does Ultrabond 1300 stay moisture insensitive in a damp dowel hole?
Yes. Ultrabond 1300 is moisture-insensitive on a damp hole. Do not use standing water as a substitute for a clean hole.
Is Ultrabond 1300 used for short-term tensile and shear under ASD?
Yes. Ultrabond 1300 is used for short-term tensile and shear under allowable stress design. Confirm the load case on the current 1300 TDS.
Does Ultrabond 1300 still take a 24-month shelf in the trailer?
Yes. Ultrabond 1300 lists a 24-month shelf in unopened containers. Keep the pails in the trailer range on the sheet.
Can Ultrabond 1300 set threaded rod as well as rebar dowels?
Yes. Ultrabond 1300 sets threaded rod and rebar dowels in uncracked concrete. It is a non-sag high-modulus epoxy, not a cracked-concrete HS-1CC.
Please complete your information below to login.