Adhesives Technology HS-1CC Ultrabond 9oz A9-HS1CC Case 12

ULTRABOND HS-1CC is a high-strength 1:1 epoxy anchoring adhesive for threaded rod and rebar in cracked or uncracked concrete.

Dry, water-saturated, water-filled, and submerged holes
Vertical, overhead, and horizontal placements
Simple 1:1 mix ratio

$22.44

Availability: In stock ( 60 Available )

Details

Adhesives Technology ULTRABOND HS-1CC High-Strength Anchoring Epoxy, 9 oz Cartridge

ULTRABOND HS-1CC is a two-component, 1:1 epoxy anchoring adhesive for threaded rod and reinforcing bar in cracked or uncracked concrete, and for internally threaded inserts in uncracked concrete. It is approved for dry, water-saturated, water-filled, and submerged holes, including vertical, horizontal, and overhead placements. Working time is about 16 minutes at 75°F, with a 7-hour full cure. Also available as the ULTRABOND HS-1CC 22 oz and the ULTRABOND HS-1CC 53 oz.

Looking for another size?

22 oz
cartridge 53 oz
cartridge

Key Features

Anchors threaded rod and rebar in cracked or uncracked concrete
Approved for dry, water-saturated, water-filled, and submerged holes
Vertical down, horizontal, upwardly inclined, and overhead placements
Non-sag 1:1 epoxy that mixes gray
Code-range application from 43°F to 110°F
Suitable for core-drilled holes in dry or water-saturated concrete
NSF/ANSI 61 drinking water system components

Applications

Threaded rod in cracked or uncracked concrete
Reinforcing bar (rebar) doweling
Internally threaded inserts in uncracked concrete
Dry, damp, water-filled, and submerged installations
Transportation infrastructure work to AASHTO M235

Technical Specifications

Property	Value
Chemistry	Two-component epoxy, 1:1 by volume
Mixed color	Gray
Consistency	Non-sag
Compressive yield	14,480 psi at 7 days, 75°F (ASTM D695)
Heat deflection	148°F (64°C) (ASTM D648)
Working / full cure	16 min / 7 hr at 75°F
Application temperature	43 to 110°F (6 to 43°C)
ASTM C881-15 / AASHTO M235	Type I, II, IV and V, Grade 3, Class A, B and C
Evaluation	IAPMO ER-591 (ACI 355.4 / ICC-ES AC308)
NSF	NSF/ANSI 61 and 372
Shelf life	24 months (unopened, 40 to 95°F)
Packaging	8.6 fl oz (254 ml) cartridge, A9-HS1CC, case of 12

Product documents: ULTRABOND HS-1CC Technical Data Sheet (PDF) | ULTRABOND HS-1CC Safety Data Sheet (PDF)

Frequently Asked Questions

What is ULTRABOND HS-1CC?
ULTRABOND HS-1CC is a two-component, 1:1 epoxy anchoring adhesive for threaded rod and rebar in cracked or uncracked concrete, and for internally threaded inserts in uncracked concrete. This page is the 9 oz cartridge (A9-HS1CC), sold as a case of 12.

How do the cartridge sizes compare?
HS-1CC cartridges are the same published epoxy in three sizes. This page is the 9 oz cartridge (A9-HS1CC), case of 12. Other sizes: ULTRABOND HS-1CC 22 oz and ULTRABOND HS-1CC 53 oz.

Can HS-1CC be used in wet or submerged holes?
Yes. It is approved for dry, water-saturated, water-filled, and submerged conditions with threaded rod or rebar. Follow the manufacturer printed installation instructions for hole drilling and cleaning.

What is the working and full cure time?
At 75°F, working time is about 16 minutes and full cure is about 7 hours. At 43°F, working time is about 45 minutes and full cure is about 144 hours. Do not disturb, torque, or load the anchor until full cure.

Can HS-1CC be used overhead?
Yes. Vertical down, horizontal, upwardly inclined, and overhead placements are listed uses. Install per the datasheet and IAPMO ER-591.

How old must the concrete be before anchoring?
For anchoring applications, concrete should be a minimum of 21 days old prior to anchor installation per ACI 355.4.

Does HS-1CC meet ASTM C881?
Yes. The current TDS meets ASTM C881-15 and AASHTO M235 Type I, II, IV and V, Grade 3, Class A, B and C. It is evaluated to IAPMO ER-591 for cracked and uncracked concrete.

More Information