Unitec WG135H Mixing Paddle

CS Unitec WG 135 H mixing paddle. 5.4 in by 24 in galvanized helix, 1/2 in hex shank. Medium-viscosity plaster, mortar, gypsum, floor compound, and quartz-filled epoxy.

5.4 in diameter, 24 in long
1/2 in hex shank for a 3-jaw chuck
Helix lifts from the bottom to keep air out

$89.71

Availability: Out of stock

Details

CS Unitec WG 135 H Mixing Paddle, 5.4 in x 24 in Hex

CS Unitec WG 135 H is a 5.4 in by 24 in galvanized helical mixing paddle with a 1/2 in hex shank for a 3-jaw drill chuck. Use it on medium-viscosity batches: finished plaster, mortar, gypsum, lime, floor compounds, granulates, and quartz-filled epoxy. The helix lifts from the bottom so air is not sucked into the mix. Welded steel for continuous professional use. The 4.5 in WG 120 H and 6.25 in WG 160 H hex paddles are not listed here. 14 mm thread paddles for CS Unitec mixers are listed separately when stocked.

Key Features

5.4 in by 24 in galvanized helical paddle
1/2 in hex shank for standard 3-jaw chucks
Mixes from the bottom up to keep air out
Medium-viscosity plaster, mortar, gypsum, lime
Floor compounds, granulates, quartz-filled epoxy
Welded steel for continuous professional use

Applications

Finished plaster, mortar, gypsum, and lime
Floor compounds and granulates
Quartz-filled epoxy resin

Technical Specifications

Property	Value
Manufacturer	CS Unitec
Model	WG 135 H
Diameter	5.4 in
Length	24 in
Shank	1/2 in hex, 3-jaw chuck
Material	galvanized welded steel
Design	helical, mix from the bottom
Viscosity class	medium
Sisters not listed	WG 120 H 4.5 in, WG 160 H 6.25 in
Mixer thread family	14 mm male, listed separately when stocked