Parcel Orders over $300 Ship Free.
Sika Floorjoint S 47.25 x 9.84 Panels
Sika FloorJoint S is a carbon-fiber polymer floor-joint panel in a 47.25 in by 9.84 in segment. Its wave profile flexes with the slabs and protects forklift traffic from joint edge impact.
- Wave joint design flexes with adjoining slabs
- Cuts heavy-traffic vibration at the joint edge
- Carbon-fiber panel outlasts ordinary joint fillers
$637.74
Sika FloorJoint S
Sika FloorJoint S is a carbon-fiber-reinforced polymer panel that repairs or replaces damaged concrete floor joints. This 47.25 in by 9.84 in gray panel uses a wave joint design that flexes with adjoining slabs and cuts point loading at the joint edge. It suits factories, warehouses, kitchens, and workshops where forklift traffic would tear ordinary joint fillers.
Key Features
- Carbon fibre reinforced polymer (PUR) floor joint panel
- Segment size 47.25 in long by 9.84 in wide by 0.78 in high
- Wave profile expands and contracts with slab movement
- Compressive strength approximately 15,954 psi after 14 days
- Compatible with Sikafloor resinous floor systems
- Maintenance-free, non-corrosive, no welding required
Applications
- Factories, warehouses, and maintenance workshops
- Commercial kitchens and sanitary resin-floor joints
- Hospitals, schools, and heavy-wear concrete floors
- New construction and renovation floor joint repair
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | Sika FloorJoint S |
| Unit | 47.25 in x 9.84 in panel |
| Height | 0.78 in |
| Color | Gray |
| Chemistry | Carbon fibre reinforced polymer (PUR) |
| Compressive strength | Approximately 15,954 psi after 14 days |
| Tensile strength | Approximately 7,252 psi after 14 days |
| Coverage | 1 piece per approximately 1.2 linear meters of joint |
| Gap capacity | Install gap up to approximately 30 mm per design table |
Product documents: Sika FloorJoint S Product Data Sheet (PDF)
Frequently Asked Questions
What jobs suit Sika FloorJoint S?
Repair or replacement of concrete floor joints in factories, warehouses, kitchens, workshops, hospitals, and schools with normal to heavy wheeled traffic.
What size is each Sika FloorJoint S panel?
The panel is 47.25 in long by 9.84 in wide by 0.78 in high.
What movement does the Sika FloorJoint S wave design allow?
The panel expands and contracts with adjoining slabs; design tables cover install gaps from 0 to approximately 30 mm with matching positive and negative movement limits.
What compressive strength does Sika FloorJoint S hold?
Approximately 15,954 psi after 14 days under ASTM C778 at 73 F.
What waterproofing detail goes under Sika FloorJoint S?
Install Sikadur Combiflex SG below the panel when a waterproof joint design is required; the surface sealant alone is for dirt control, not watertightness.
What chemistry is Sika FloorJoint S?
Carbon fibre reinforced polymer (PUR) with a gray finish.
Please complete your information below to login.