Euclid Euco-Speed 50lb Bag

Euclid Euco Speed is a rapid-setting, high-strength, cementitious repair mortar ideal for quick repairs in concrete structures. Its fast curing properties allow for efficient project turnaround, making it an excellent choice for time-sensitive projects.

High early strength, fast turnaround time
Interior and exterior applications
Use from 1/2" to 6" depth

$43.23

Details

Euclid Euco-Speed 50lb Bag

Euclid Euco-Speed is a rapid-setting, rapid-hardening cementitious repair mortar designed for horizontal concrete repairs that need fast turnaround and durable performance. Requiring only the addition of water, it is easy to use with standard mixing and placing equipment while providing strong adhesion to properly prepared concrete. Euco-Speed is suitable for bridge decks, ramps, parking garages, pavements, marine structures, and formed vertical or horizontal patching.

Key Features

Rapid-setting horizontal repair mortar for quick repairs.
Rapid, high early strength for fast turnaround.
Single-component cementitious repair material requiring only water.
Easy to use with standard equipment and procedures.
Excellent adhesion to properly prepared concrete.
Suitable for both interior and exterior repairs.
Versatile thickness range from 1/2 inch to 6 inches.
Can be extended with pea gravel for deeper repairs.

Applications

Bridge decks.
Ramps.
Parking garages.
Pavements.
Formed vertical patching.
Horizontal concrete patching.
Marine structures.
Fast turnaround concrete repair projects.

Technical Specifications

Property	Value
Product Type	Rapid-setting horizontal repair mortar
Packaging	50 lb bag
Shelf Life	2 years in original, unopened package
Mix Water	0.70 to 0.75 gal per bag
Yield	Approximately 0.4 ft³ per bag when mixed with 0.75 gal water
Extended Yield	Approximately 0.56 ft³ per bag when extended with 25 lb of 3/8 inch pea gravel
Coverage at 1/2 inch	Approximately 9.8 sq ft per bag
Extended Coverage at 1/2 inch	Approximately 13.4 sq ft per bag with pea gravel extension
Compressive Strength	3 hour: 1,100 psi; 1 day: 5,000 psi; 7 day: 6,000 psi; 28 day: 7,000 psi
Final Set Time	Approximately 30 minutes
Wheeled Traffic	Approximately 6 to 8 hours
Flow After 5 Minutes	122%
Scaling Resistance	0 rating after 25 cycles
Length Change in Water at 28 Days	+0.100%
Length Change in Air at 28 Days	-0.065%
Thickness Range	1/2 inch to 6 inches
Compliance	ASTM C928; Canadian Food Inspection Agency; MTQ; MTO

FAQs

What is Euclid Euco-Speed used for?
It is used for rapid horizontal concrete repairs such as bridge decks, ramps, parking garages, pavements, marine structures, and formed vertical or horizontal patching.

How quickly does Euco-Speed set?
It has a final set time of about 30 minutes and can typically be opened to wheeled traffic in about 6 to 8 hours.

Can Euco-Speed be extended for deeper repairs?
Yes. For repairs from 1 inch to 6 inches deep, it may be extended with 25 lb of clean, saturated surface dry 3/8 inch rounded pea gravel per bag.

What finish is recommended for Euco-Speed?
It is designed to be finished with a float or broom appearance. A steel trowel finish may be possible, but timing is critical and achieving a smooth finish over large areas can be difficult.

How should Euco-Speed be cured?
Cure it with a high-solids curing compound such as SUPER AQUA-CURE VOX or SUPER DIAMOND CLEAR VOX, or wet cure it for a minimum of 3 days if a curing compound is not desired.

What should be avoided during installation?
Do not apply over frozen concrete, do not place below 40°F, and do not expose the repair to heavy traffic until it reaches at least 2,000 psi compressive strength.

More Information