Parcel Orders over $300 Ship Free.
Euclid Euco Clean & Strip 5 Gallon Pail
Euclid Euco Clean Strip is a specially formulated, low-odor, biodegradable stripper designed to effectively remove a wide range of coatings, adhesives, and sealers from concrete and masonry surfaces.
- Low-odor and biodegradable
- Effective removal of coatings and adhesives
- Suitable for concrete and masonry surfaces
$548.00
Availability:
In stock
( 1 Available )
Shipping restrictions apply
Euclid Euco Clean & Strip 5 Gallon Pail
Euclid Euco Clean & Strip is a heavy-duty concrete floor cleaner and stripper formulated to remove curing compounds, oils, grease, most concrete sealers, and other contaminants from concrete floors. Its citrus-based solvent formula will not etch concrete like acid-based removers and offers a safer alternative to petroleum- and chlorinated-solvent-based stripping products. It can be used full strength or diluted with water depending on the severity of the cleaning or stripping task.
Key Features
- Heavy-duty concrete floor cleaner and stripper.
- Removes curing compounds, cure and seals, oils, grease, and many other contaminants.
- Citrus-based solvent formula will not etch concrete like acid-based removers.
- Safer alternative to petroleum- and chlorinated-solvent-based removal products.
- High-strength concentrated formula.
- Can be diluted with water or used full strength based on job conditions.
- Rinses clean with water.
- Also suitable for degreasing tools and equipment.
Applications
- Removal of concrete curing compounds.
- Removal of cure and seal products from concrete floors.
- Breaking down grease, oil, dirt stains, and rubber tire marks.
- Heavy-duty concrete floor cleaning.
- Light concrete surface cleaning.
- Degreasing tools and equipment.
- Cleaning concrete floors before further treatment or recoating.
- General contaminant removal from concrete surfaces.
Technical Specifications
| Property | Value |
|---|---|
| Product Type | Concrete floor cleaner and stripper |
| Packaging | 5 gallon pail |
| Shelf Life | 2 years in original, unopened containers |
| Weight per Gallon | 7.0 lbs/gal |
| Flash Point | 117 degrees F |
| Odor | Citrus |
| Appearance | Clear, light yellow liquid |
| Heavy Duty Cleaning Dilution | 5:1 water to product to full strength |
| Heavy Duty Cleaning Coverage | 100 to 200 sq ft/gal |
| Light Cleaning Dilution | 5:1 to 10:1 water to product |
| Light Cleaning Coverage | 400 to 500 sq ft/gal |
| Cleanup | Clean tools and equipment with water |
FAQs
What is Euco Clean & Strip used for?
It is used to remove curing compounds, cure and seals, grease, oil, dirt stains, rubber tire marks, and other contaminants from concrete floors.
Can Euco Clean & Strip be diluted?
Yes. It can be diluted with water or used full strength depending on the severity of the cleaning or stripping task.
Will this product etch concrete like acid-based removers?
No. It is formulated with a citrus-based solvent that will not etch concrete like acid-based removers.
How is Euco Clean & Strip applied?
Apply the solution to the floor while scrubbing with a stiff broom or mechanical floor scrubber, allow it to dwell for about 20 to 40 minutes or longer if needed, then rinse thoroughly with water before it dries.
Can Euco Clean & Strip be used on all surfaces?
No. It should not be used on resilient tile, asphalt, or painted surfaces.
Does Euco Clean & Strip require multiple applications?
It may. Re-application can be necessary for extremely dirty or stained floors and for hard-to-remove curing compounds or cure and seal products.
Please complete your information below to login.