A joint sealant for building walls and wall systems, Backerseal is an economical, precompressed, secondary joint sealant to field-applied caulking. Backerseal is a polyurethane foam infused with a hydrophobic-acrylic impregnation technology.
A joint sealant for building walls and wall systems, Emseal Backerseal is an economical, precompressed, secondary joint sealant to field-applied caulking. Backerseal is a polyurethane foam infused with a hydrophobic-acrylic impregnation technology.
Unlike ‘double caulk and backer rod’, Backerseal behind field-applied liquid sealants provides true “belt and suspenders” sealing–two systems working on different principles to perform the same function. ‘Double caulk and backer rod’ is very difficult to install to achieve the geometry necessary to function in moving joints. In addition, the same forces (tensile stresses at the bondline and within the cured sealant) that will cause the outer installation to fail, will also likely cause the inner installation to fail as well. Backerseal works in compression providing a practical-to-install, fully functional secondary joint sealant using different performance principles than the primary, liquid sealant. Additionally Backerseal provides insulation and sound attenuation value as well as the ability to resist the effects of air-pressure differentials.
Features Provides watertight secondary seal Provides R-value at joints Resists air pressure differentials Remains firmly in compression against substrates Contributes to LEED Odorles UV Stable Low temperature flexible, high temperature stable
For use in: panelized wall systems, curtain wall systems, window perimeters, precast panels, concrete, brick, stone. metal panels, etc. Also used as a secondary sealant behind conventional backer-rod and liquid sealands, and behind directly-applied liquid sealant. See datasheet for more information.