Parcel Orders over $300 Ship Free.
Dayton Superior Sure Anchor I J51 600ml Cartridge 100908
Dayton Superior Sure Anchor I J51 is a two-component, moisture-tolerant, 100% solids, high-modulus epoxy gel in a 600 ml cartridge for anchoring bolts, dowels, and rebar in concrete. Non-sag 1:1 mix holds in vertical and horizontal holes, and sets injection ports before grouting.
- Gel time is 12 minutes at 73 F
- Crack faces are sealed and injection ports are set before grouting
- Full cure is 24 hours at 70 F
$505.41
Availability:
Out of stock
Dayton Superior Sure Anchor I J51
Dayton Superior Sure Anchor I J51 is a two-component, moisture-tolerant, 100% solids, high-modulus epoxy gel in a 600 ml cartridge for anchoring bolts, dowels, and rebar in concrete. Non-sag 1:1 mix holds in vertical and horizontal holes, and sets injection ports before grouting. Product code is 100908. Gel time is 12 minutes at 73 F. Full cure is 24 hours at 70 F.
Key Features
- High-modulus epoxy gel is used to anchor bolts, dowels, rebar, and threaded rod
- Non-sag 1:1 mix holds in vertical and horizontal holes
- Gel time is 12 minutes at 73 F
- Crack faces are sealed and injection ports are set before grouting
- Full cure is 24 hours at 70 F
Applications
- Bolts, dowels, and rebar that need a 600 ml cartridge gel
- Vertical and horizontal structural bonds and patches
- Cracks that need a port seal before injection grouting
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | 100% solids high-modulus epoxy gel |
| Pack | 600 ml (20 oz) cartridge |
| Product code | 100908 |
| Mix ratio | 1:1 by volume |
| Gel time 60 g at 73 F | 12 minutes |
| Gel time at 50 F | 32 minutes |
| Full cure at 70 F | 24 hours |
| ASTM C881 | Type I, II, IV, V Grade 3 Class B and C, except gel time |
| VOC | 0 g/L |
| Place temp | 40 F and above |
| Compressive 7 day at 60 F | 12,500 psi |
Product documents: Dayton Superior Sure Anchor I J51 Data Sheet (PDF)
Frequently Asked Questions
What steel is Dayton Superior Sure Anchor I J51 used to anchor?
Bolts, dowels, reinforcing steel, and threaded rod in concrete. Vertical and horizontal structural bonding as well.
What pack size is Dayton Superior Sure Anchor I J51?
The pack is a 600 ml (20 oz) cartridge, code 100908. Mix 1:1 by volume.
What cooler gel time does Dayton Superior Sure Anchor I J51 have?
12 minutes on a 60 gram mass. 32 minutes at 50 F.
What moisture does Dayton Superior Sure Anchor I J51 tolerate?
Damp, sound concrete. Standing water and dust are blown out of the hole first.
What crack work is Dayton Superior Sure Anchor I J51 used on?
Sealing crack faces and setting injection ports before grouting.
What ASTM types does Dayton Superior Sure Anchor I J51 meet?
ASTM C881 Types I, II, IV, V Grade 3 Class B and C, except gel time due to fast set.
Please complete your information below to login.