Parcel Orders over $300 Ship Free.
Dayton Superior Sure Anchor I J51 1 Gallon 69364
Dayton Superior Sure Anchor I J51 is a two-component, moisture-tolerant, 100% solids, high-modulus epoxy gel in a 1 gallon unit for anchoring bolts, dowels, and rebar in concrete. Non-sag 1:1 mix holds in vertical and horizontal holes, and sets injection ports before grouting.
- Gel time is 12 minutes at 73 F
- Moisture-tolerant mix is used on damp, sound concrete
- Crack faces are sealed and injection ports are set before grouting
$170.28
Availability:
Out of stock
Dayton Superior Sure Anchor I J51
Dayton Superior Sure Anchor I J51 is a two-component, moisture-tolerant, 100% solids, high-modulus epoxy gel in a 1 gallon unit for anchoring bolts, dowels, and rebar in concrete. Non-sag 1:1 mix holds in vertical and horizontal holes, and sets injection ports before grouting. Product code is 69364. Gel time is 12 minutes at 73 F. Full cure is 24 hours at 70 F.
Key Features
- High-modulus epoxy gel is used to anchor bolts, dowels, rebar, and threaded rod
- Non-sag 1:1 mix holds in vertical and horizontal holes
- Gel time is 12 minutes at 73 F
- Moisture-tolerant mix is used on damp, sound concrete
- Crack faces are sealed and injection ports are set before grouting
Applications
- Bolts, dowels, and rebar that need a non-sag epoxy gel
- Vertical and horizontal structural bonds and patches
- Cracks that need a port seal before injection grouting
Technical Specifications
| Property | Value |
|---|---|
| Chemistry | 100% solids high-modulus epoxy gel |
| Pack | 1 gallon unit |
| Product code | 69364 |
| Mix ratio | 1:1 by volume |
| Gel time 60 g at 73 F | 12 minutes |
| Gel time at 50 F | 32 minutes |
| Full cure at 70 F | 24 hours |
| ASTM C881 | Type I, II, IV, V Grade 3 Class B and C, except gel time |
| VOC | 0 g/L |
| Place temp | 40 F and above |
| Compressive 7 day at 60 F | 12,500 psi |
Product documents: Dayton Superior Sure Anchor I J51 Data Sheet (PDF)
Frequently Asked Questions
What anchors is Dayton Superior Sure Anchor I J51 used on?
Bolts, dowels, reinforcing steel, and threaded rod in concrete. Vertical and horizontal structural bonding as well.
What unit size is Dayton Superior Sure Anchor I J51?
The pack is a 1 gallon unit, code 69364. Mix 1:1 by volume.
What gel time does Dayton Superior Sure Anchor I J51 have?
12 minutes at 73 F on a 60 gram mass. 32 minutes at 50 F.
What cure time does Dayton Superior Sure Anchor I J51 need?
Full cure is 24 hours at 70 F. Anchors stay unloaded until that wait is over.
What moisture does Dayton Superior Sure Anchor I J51 tolerate?
Damp, sound concrete. Standing water and dust are blown out of the hole first.
What crack work is Dayton Superior Sure Anchor I J51 used on?
Sealing crack faces and setting injection ports before grouting.
Please complete your information below to login.