Adhesives Technology ULTRABOND® 1 is a 2-component, 1:1 mix ratio, structural epoxy system that offers exceptional strength in anchoring and doweling applications and can be used in temperatures from 40 °F to 110 °F (4 °C to 43 °C). ULTRABOND 1 in cartridges has been tested in accordance with ASTM E488 and ASTM E1512 for its capability to resist static, dynamic, seismic and wind loads in uncracked concrete for both threaded rod and rebar.
Applications: Anchoring threaded rods, bolts and rebar dowels into uncracked concrete Short and long term tensile anchoring, including wind, seismic and shear forces in accordance with allowable stress design (ASD) Grouting dowel bars and tie bars for full depth concrete pavement repairs Bonding agent for fresh to hardened concrete, and hardened to hardened concrete
Moisture insensitive allowing installation and curing in damp environments. Withstands freeze-thaw conditions. Little or no odor. High modulus. In-service temperature range between 35 °F (2 °C) and 180 °F (82 °C).