Parcel Orders over $300 Ship Free.
Unisorb Lev-L-Line Machinery Mounts
Unisorb Lev-L-Line Mounts provide true self-alignment with an absolute even load distribution over the entire bearing surface. They are designed to compensate for uneven foor distortion found in most industrial plants, and may be used with or without anchor bolts.
- Compensate for uneven floors
- True vertical leveling adjustment
- Permits bolting machine to floor
Drop Shipped
SKU
Unisorb Lev-L-Line Machinery Mounts
Unisorb Lev-L-Ine Machinery Mounts
Unisorb Lev-L-Ine Machinery Mounts use a spherical aligning disc to provide true self-alignment and even load distribution across the bearing surface. They are designed to compensate for uneven floor distortion common in industrial plants and can be used with or without anchor bolts. Lev-L-Ine mounts provide accessible, true vertical leveling adjustment, with machined mating surfaces that support quick and permanent leveling.
Key Features
- Spherical aligning disc supports intimate contact and even load distribution over the bearing surface.
- Designed to compensate for uneven floor distortion in industrial plants.
- True vertical leveling adjustment with accessible adjustment point.
- Machined mating surfaces support quick, easy, and permanent leveling.
- Anchor bolt clearance hole permits bolting machinery to the floor.
- U.S. Patent No. 913,017 applies to all Lev-L-Ine mounts.
Applications
- Machine leveling where the floor line may be sloped but the machine line must be level.
- Equipment installations requiring even bearing contact and controlled load distribution.
- Industrial machinery setups needing permanent leveling with machined contact surfaces.
- Applications where anchoring to the floor is desired, or where mounts are used without anchors.
Technical Specifications:
| Property | Value |
|---|---|
| Alignment | Spherical aligning disc provides true self-alignment and even load distribution over the entire bearing surface |
| Use | Designed to compensate for uneven floor distortion; may be used with or without anchor bolts |
| Leveling Adjustment | True vertical leveling adjustment |
| Anchoring | Anchor bolt clearance hole permits bolting machine to floor |
| Materials (Mounting Plate, Top Wedge, Bottom Lifting Wedge, Base) | 65-45-12 ductile iron |
| Tensile Strength | 65,000 psi (454.8 MPa) minimum |
| Bolt Stock | AISI C 1215 steel |
Model Dimensions and Load Capacity:
| Model | Load Capacity | Length (L) | Width | Height | Max Adjustment | Hole Diameter | Bolt Thread | Hex |
|---|---|---|---|---|---|---|---|---|
| LL-7 | 7,000 lbs (3,182 kg) | 5.91 in (150 mm) | 4.25 in (108 mm) | 1.63 in (41 mm) | 0.18 in (4.6 mm) | 1.30 in (33 mm) holes | M10 x 1.25 | 10 mm internal hex |
| LL-22 | 22,000 lbs (10,000 kg) | 5.63 in (143 mm) | 4.25 in (108 mm) | 2.83 in (72 mm) | 0.18 in (4.6 mm) | 1.10 in (28 mm) holes | M16 x 2 | 24 mm hex |
| LL-33 | 33,000 lbs (15,000 kg) | 6.89 in (175 mm) | 4.25 in (108 mm) | 3.35 in (85 mm) | 0.18 in (4.6 mm) | 1.18 in (30 mm) holes | M20 x 2.5 | 30 mm hex |
Frequently Asked Questions
What problem are Lev-L-Ine mounts designed to address?
They are designed to compensate for uneven floor distortion commonly found in industrial plants.
How do Lev-L-Ine mounts achieve even load distribution?
The spherical aligning disc provides self-alignment and distributes load evenly over the entire bearing surface.
Can Lev-L-Ine mounts be used with anchor bolts?
Yes. They may be used with or without anchor bolts, and include an anchor bolt clearance hole for bolting machinery to the floor.
What materials are used for the mount body components?
The mounting plate, top wedge, bottom lifting wedge, and base are 65-45-12 ductile iron with a minimum tensile strength of 65,000 psi (454.8 MPa).
Which Lev-L-Ine model should I select?
Select based on required load capacity and mounting dimensions. The LL-7 is rated for 7,000 lbs, the LL-22 for 22,000 lbs, and the LL-33 for 33,000 lbs.
Please complete your information below to login.