Parcel Orders over $300 Ship Free.
Stratarock Pan-In-A-Pail
Stratarock Pan-In-A-Pail is a two-component 100% solids epoxy lining in a 25 lb kit that yields 0.24 cu ft. It seals leaking drip pans, including vertical pan edges, as an alternative to replacing the pan.
- Placed without special application equipment
- Maximum placement is 1/4 inch
- Minimum cure 6 hours at 77 F
$250.00
Availability:
In stock
( 2 Available )
Stratarock Pan-In-A-Pail
Stratarock Pan-In-A-Pail is a two-component 100% solids epoxy lining in a 25 lb kit that yields 0.24 cu ft. It is used to seal leaking drip pans on air handlers, AC units, cooling towers, and condensate or refrigeration pans. Higher viscosity and adhesive grab seal vertical pan edges and hard-to-reach spots. Maximum placement is 1/4 inch. The cured liner is more durable than a metal pan and is not prone to corrosion.
Key Features
- Two-component 100% solids epoxy lining
- Higher viscosity seals vertical pan edges
- Reaches hard-to-reach spots
- Maximum placement 1/4 inch
- Placed without special application equipment
- Cured liner is not prone to corrosion like metal pans
Applications
- Air handler drip pans
- AC unit pans
- Cooling tower pans
- Condensate and refrigeration pans
Technical Specifications
| Property | Value |
|---|---|
| Compressive strength, 24 hours | 13,000 psi |
| Compressive strength, full cure | 17,000 psi |
| Tensile strength | 4,260 psi |
| Flexural strength | 6,800 psi |
| Viscosity, mixed | 2,100 cps |
| Pot life | 15 minutes at 77 F |
| Cure, minimum | 6 hours at 77 F |
| Maximum thickness | 1/4 inch |
| Yield | 0.24 cu ft from a 25 lb kit |
| Color | Gray |
Product documents: Stratarock Pan-In-A-Pail Data Sheet (PDF)
Frequently Asked Questions
What drip-pan work uses Stratarock Pan-In-A-Pail?
Sealing leaking drip pans to extend pan life on air handlers, AC units, cooling towers, condensate pans, and refrigeration pans. The cured surface is more durable than a metal pan and is not prone to corrosion.
What size is Stratarock Pan-In-A-Pail?
The kit is 25 lb and yields 0.24 cu ft. Part A is resin and Part B is hardener.
What vertical-edge seal does Stratarock Pan-In-A-Pail have?
Higher viscosity and adhesive grab create a seal on the vertical edges of the pan and in spots that are hard to reach by hand. It pours into place without special application equipment.
What maximum thickness does Stratarock Pan-In-A-Pail have?
Maximum placement is 1/4 inch. Mixed viscosity is 2,100 cps. Pot life is 15 minutes at 77 F.
What unit-downtime wait does Stratarock Pan-In-A-Pail have?
Minimum cure is 6 hours at 77 F. Full cure is 5 to 7 days. Surface temperatures of 60 F to 90 F are recommended during installation and cure, with material between 70 F and 90 F before placement.
What full-cure compressive strength does Stratarock Pan-In-A-Pail have?
Typical laboratory full-cure compressive strength is 17,000 psi (ASTM C-579). Twenty-four-hour compressive strength is 13,000 psi. Tensile strength is 4,260 psi. Flexural strength is 6,800 psi. Expect reasonable variation under field conditions.
Please complete your information below to login.