STEEL-IT 4210G 2-component epoxy precoat with 316L stainless flake. 2 gallon kit, Parts A and B. Goes under 4907 topcoat.
STEEL-IT 4210 is the 2-component epoxy precoat with 316L stainless leafing pigment. This 2 gallon kit is Parts A and B under 4907 topcoat on steel, aluminum, and plant equipment. Recoat sits in a 12-24 hour window. Pot life after mix is 6-8 hours. Apply at 50-100 F. The same precoat is also the 2 quart kit. 4907 topcoat is listed separately. Follow the current STEEL-IT data on the job.
| Property | Value |
|---|---|
| Manufacturer | STEEL-IT |
| Product | 4210 Epoxy Precoat |
| Model | 4210G |
| Pack | 2 gallon kit, A+B |
| Mix | 1:1 by volume |
| Induction | 45 minutes |
| Pot life | 6-8 hours |
| Apply | 50-100 F, RH under 85% |
| Dry to touch | 2 hours |
| Recoat | 12-24 hours |
| Coverage | about 215 sq ft/gal at 3 mils |
| Topcoat | 4907, listed separately |
Product documents: STEEL-IT 4210 / 4907 Epoxy System
What is this?
STEEL-IT 4210G, a 2 gallon kit of 2-component epoxy precoat with 316L stainless flake.
How do I mix it?
Agitate A and B, mix 1 to 1, wait 45 minutes, then spray. Pot life is 6-8 hours.
Recoat window?
12-24 hours onto 4907. If you miss 24 hours, scuff with 200 grit.
Other pack?
The 2 quart kit. 4907 topcoat is listed separately. This is not the polyurethane.
Who makes it?
STEEL-IT (Stainless Steel Coatings, Inc.).
Please complete your information below to login.