Simpson Strong-Tie CIP-F22 Crack Injection 22oz Cartridge

CIP-F flexible paste-over 22 oz cartridge, model CIP-F22. Mix 1 to 1. Gel about 4 minutes at 72 F. Peel off after injection.

22 oz cartridge, model CIP-F22
Paste-over, not injection resin; mix 1 to 1
Gel about 4 minutes at 72 F; peels off

$67.90

Availability: Out of stock

Details

CIP-F Flexible Paste-Over, 22 oz CIP-F22

CIP-F is a flexible, peelable, fast-curing paste-over used to seal a crack and hold injection ports before epoxy or urethane injection. This 22 oz cartridge, model CIP-F22, mixes 1 to 1. Gel time is about 4 minutes at 72 F. Peel it off when the injection is done. It is not injection resin. CIP-LO is a rigid paste-over and is listed separately. Follow the current Simpson Strong-Tie data on the job.

Key Features

Flexible paste-over to seal cracks and hold injection ports
22 oz cartridge, model CIP-F22, mixes 1 to 1
Gel about 4 minutes at 72 F; peel off when the injection is done
Non-sag on horizontal, vertical, or overhead work
Not injection resin; CIP-LO is the rigid paste-over, listed separately

Applications

Temporary paste-over before epoxy injection
Temporary paste-over before urethane injection
Port setting on vertical or overhead cracks

Technical Specifications

Property	Value
Manufacturer	Simpson Strong-Tie
Product	CIP-F
Model	CIP-F22
Pack	22 oz dual cartridge
Mix	1:1
Type	Flexible paste-over
Gel 72 F	About 4 min
Cure 72 F	About 60 min
Color	Gray
Not	Injection resin or CIP-LO