Parcel Orders over $300 Ship Free.
Euclid Tamoseal Gray 50lb Bag
Cement-based, polymer-modified material designed to waterproof concrete and masonry. When mixed with AKKRO-7T or FLEX-CON acrylic admixture, it becomes suitable to seal vertical and light duty horizontal surfaces.
- Waterproofs and Decorates
- Seals Static Cracks
- Breathable
$37.54
Euclid Tamoseal Gray 50lb Bag
Euclid Tamoseal Gray is a cement-based, polymer-modified waterproofing treatment designed to waterproof and decorate concrete and masonry surfaces. It bonds tenaciously to the substrate, becomes an integral part of the surface, and remains breathable while helping seal static cracks. When mixed with AKKRO-7T or FLEX-CON acrylic admixture, Tamoseal is suitable for vertical and light-duty horizontal waterproofing applications.
Key Features
- Cement-based, polymer-modified waterproofing treatment.
- Waterproofs and decorates concrete and masonry surfaces.
- Develops a tenacious bond and becomes an integral part of the substrate.
- Durable and breathable after cure.
- Slightly flexible to help seal static cracks.
- Suitable for potable water contact in Gray and White colors.
- Can be used on interior and exterior surfaces.
- Suitable for vertical and light-duty horizontal surfaces when mixed with approved admixtures.
Applications
- Concrete foundations.
- Block foundations.
- Water tanks.
- Reservoirs.
- Interior waterproofing applications.
- Exterior waterproofing applications.
- Balconies.
- Light-duty horizontal and vertical concrete or masonry surfaces.
Technical Specifications
| Property | Value |
|---|---|
| Product Type | Cement-based waterproofing treatment |
| Color | Gray |
| Packaging | 50 lb bag |
| Shelf Life | 18 months in original, unopened package |
| Base Coat Coverage | 2 lb/yd², approximately 225 ft² per 50 lb bag |
| Finish Coat Coverage | 1 lb/yd², approximately 450 ft² per 50 lb bag |
| Total Applied Thickness | Approximately 1/16 to 1/8 inch total for two coats |
| Compressive Strength | 7 day: 4,500 psi; 28 day: 6,400 psi |
| Flexural Strength | 7 day: 350 psi; 28 day: 810 psi |
| Tensile Strength | 7 day: 330 psi; 28 day: 390 psi |
| Absorption | 24 hour soak: 4.4%; 5 hour boil: 3.9% |
| Freeze/Thaw Resistance | 1.20% loss at 50 cycles |
| Durability Factor | 101.0 after 300 cycles |
| Working Time | 1 hour |
| Water Vapor Transmission | 12 perms |
| Minimum / Maximum Coats | 2 coats minimum, 2 coats maximum |
| Induction Time | 10 minutes |
| Recoat Cure Time | 12 to 24 hours |
| Final Cure Time | 7 days minimum |
| Certification | NSF/ANSI Standard 61 certified for potable water in Gray and White only |
FAQs
What is Euclid Tamoseal used for?
It is used to waterproof and decorate concrete and masonry surfaces such as foundations, water tanks, reservoirs, and balconies.
Can Tamoseal be used for potable water applications?
Yes. Gray and White Tamoseal are NSF/ANSI Standard 61 certified for use with potable water.
How many coats of Tamoseal are required?
Tamoseal is designed to be applied in two coats, with a recoat time of 12 to 24 hours between applications.
Can Tamoseal be used on horizontal surfaces?
Yes, but only for light-duty horizontal surfaces when mixed with AKKRO-7T or FLEX-CON acrylic admixture as directed by the manufacturer.
Can Tamoseal be applied to actively leaking surfaces?
No. The manufacturer states that Tamoseal should not be applied to surfaces that are actively leaking.
What should be avoided during application?
Do not apply to frozen or frost-filled surfaces, do not apply when temperatures may fall below 40°F within 24 hours, and do not use it on moderate to heavy traffic-bearing surfaces.
Please complete your information below to login.