Parcel Orders over $300 Ship Free.
Euclid Tammscure WB 5 Gallon Pail THH3WBP05
Euclid Tammscure WB is a water-based dissipating curing compound in a 5 gallon pail. It is used on interior and exterior slabs that will later receive a covering, coating, or sealer.
- Holds moisture, then breaks down under UV and traffic
- Helps minimize dusting on new concrete
- Supports stronger, more wear-resistant concrete
$79.54
Euclid Tammscure WB Dissipating Cure, 5 gallon pail
Euclid Tammscure WB is a water-based dissipating resin curing compound. It is used on interior and exterior slabs that will later receive a covering, coating, or sealer. It holds moisture for hydration, then the film breaks down under traffic and ultraviolet light, and it helps minimize dusting on new concrete. Typical laboratory drying time is 1 to 2 hours at 73 F.
Key Features
- Water-based dissipating resin cure
- Temporary moisture-retaining film
- Breaks down under UV and traffic
- Helps minimize dusting
- Stronger, more wear-resistant concrete
- Interior or exterior concrete
Applications
- Curing interior or exterior concrete.
- Concrete that will later receive a covering or coating.
- Work where a long-term membrane film is not desired on the surface.
Technical Specifications
| Property | Value |
|---|---|
| VOC | 47 g/L |
| Moisture loss | < 0.55 kg/m² (ASTM C156) |
| Drying time | 1 to 2 hours at 73 F |
| Foot traffic | 2 to 4 hours |
| Wheel traffic | 6 to 10 hours |
| Coverage, textured concrete | 200 ft²/gal |
| Coverage, smooth concrete | 400 ft²/gal |
| Dissipation | approximately 4 to 6 weeks |
| ASTM C309 | Types 1 and 1-D, Classes A and B |
| AASHTO M 148 | Types 1 and 1-D, Classes A and B |
Documents
Tammscure WB Technical Data Sheet
Frequently Asked Questions
Where is Euclid Tammscure WB used?
Interior or exterior concrete that will later receive a covering, coating, or sealer.
What is the moisture loss of Euclid Tammscure WB?
Typical laboratory moisture loss is less than 0.55 kg/m² (ASTM C156). Expect reasonable variation under field conditions.
What is the dissipation time of Euclid Tammscure WB?
The film begins to break down approximately 4 to 6 weeks after application. Exact time varies with application rate, moisture in the concrete, UV exposure, and construction traffic.
What is the ASTM C309 listing of Euclid Tammscure WB?
ASTM C309 Types 1 and 1-D, Classes A and B. It also meets AASHTO M 148 Types 1 and 1-D, Classes A and B, and is NTPEP tested and approved.
How soon is Euclid Tammscure WB ready for foot traffic?
Typical laboratory foot traffic is 2 to 4 hours. Wheel traffic is 6 to 10 hours at 73 F and 50% RH. Expect reasonable variation under field conditions.
What is the shelf life of Euclid Tammscure WB?
2 years when stored properly.
Please complete your information below to login.