Parcel Orders over $300 Ship Free.
Collomix Two-Fin High Viscosity Paddle WK120S
Collomix WK 120 S is a two-fin mixing paddle for ready-mixed mortar, plaster, screed, and grouts in a 1/2 in drill chuck.
- Bottom-to-top action on compact, viscous mixes
- Two fins, lower load on the drill
- Protective ring at the bucket floor
$51.50
Availability:
In stock
( 6 Available )
Collomix WK 120 S Two-Fin Mixing Paddle
Collomix WK 120 S is a two-fin mixing paddle for compact, viscous materials: ready-mixed mortar, plaster, screed, grouts, and synthetic resin mortar. Two helices drill into the batch and lift from the bottom so the mixer works the material instead of the operator forcing it down. The 1/2 in hex shaft chucks in a drill, not a HEXAFIX Collomix mixer. Protective ring at the floor saves the bucket.
Key Features
- Two fins for mortar, plaster, screed, and grout.
- Bottom-to-top action that is easier on the drill.
- 1/2 in hex shaft for a standard drill chuck.
- Protective ring at the bucket floor.
- Good guidance on pasty, creamy, plastic mixes.
- Made in Germany.
Applications
- Ready-mixed mortar and masonry cement.
- Plaster, screed, and joint grouts.
- Fillers and epoxy resin grout.
- Drill-powered batches in the 4.0-6.6 gal range.
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Collomix |
| Product | WK 120 S |
| Part Number | 41250-225 |
| Paddle type | WK two-fin, compact/viscous |
| Connection | 1/2 in hex, drill chuck (S) |
| Mixing quantity | 4.0-6.6 gal |
| Diameter | 4 3/4 in |
| Length | 23 1/4 in |
| Mixing action | Bottom to top |
| Protective ring | Yes |
| Compatible drive | Drill with 1/2 in chuck |
| Origin | Made in Germany |
Product documents: Collomix Mixing Paddles datasheet EN-US (PDF)
Frequently Asked Questions
Is Collomix WK 120 S for ready-mixed mortar, plaster, screed, and grouts?
Yes. Collomix publishes Collomix WK 120 S for compact, viscous materials: ready-mixed mortar, plaster, screed, grouts, and synthetic resin mortar.
Does Collomix WK 120 S mix from the bottom to the top?
Yes. Two helices on Collomix WK 120 S drill into the batch and lift from the bucket floor so pasty material turns over without the operator forcing it down.
Do the two fins on Collomix WK 120 S lower the load on the drill?
Yes. Collomix publishes the two-fin Collomix WK 120 S as easier on the drive than a three-helix MK paddle when you are mixing mortar or plaster in a drill chuck.
Does Collomix WK 120 S use a 1/2 in hex shaft?
Yes. Collomix WK 120 S is the S connection: a 1/2 in hex shaft that chucks in a drill.
Does Collomix WK 120 S have a protective ring at the bucket floor?
Yes. Collomix WK 120 S includes the floor ring that keeps the two fins from chewing the tub while they lift the mix.
When should I use Collomix WK 120 S instead of Collomix MK 160 HF?
Use Collomix WK 120 S for pasty mortar, plaster, screed, and grouts when you want two fins and less load on a drill. Pick the three-helix Collomix MK 160 HF when the batch is gravel-filled concrete or extra-heavy mortar on a HEXAFIX mixer.
Please complete your information below to login.