Tremco Vulkem 116 White is a textured, moisture-curing polyurethane in a 20 oz sausage. It is used on exterior concrete, masonry, and window perimeters, and holds ±25% cyclic movement.
Tremco Vulkem 116 is a textured, single-component, moisture-curing polyurethane sealant for exterior construction joints. It is used on poured and precast concrete, masonry work, window and door perimeters, and similar construction joints. Primerless adhesion to porous substrates and ±25% cyclic movement make it a fit for expansion joints in commercial work.
| Property | Value |
|---|---|
| Movement | ±25%, ASTM C719 |
| Hardness | 40, ASTM C661 |
| Skin time | 6 hours, ASTM C679 |
| Tack-free time | 30 hours at 73.4°F / 50% RH |
| Peel, concrete | 20 to 25 pli, ASTM C794 |
| Peel, brick | 19 to 23 pli, ASTM C794 |
| Tensile | 200 to 250 psi, ASTM D412 |
| Elongation | 200 to 300%, ASTM D412 |
| Extrusion rate | 40 to 50 mL/min, ASTM C1183 |
| Stain | No stain, ASTM C510 |
Vulkem 116 Technical Data Sheet
What is the concrete adhesion of Tremco Vulkem 116?
20 to 25 pli, ASTM C794.
What is the brick adhesion of Tremco Vulkem 116?
19 to 23 pli, ASTM C794.
What is the stain of Tremco Vulkem 116 on masonry?
No stain and no visible color change, ASTM C510.
What is the damp-surface use of Tremco Vulkem 116?
It is not applied over damp, green, or contaminated surfaces.
What is the window-and-door use of Tremco Vulkem 116?
Window and door perimeters, plus poured and precast concrete and masonry.
What is the occupied-building use of Tremco Vulkem 116?
Exterior only. It is not used inside an occupied building, even with no occupants present.
Please complete your information below to login.