Parcel Orders over $300 Ship Free.
Stratarock Epoxy Primer SF
Stratarock Epoxy Primer SF is a solvent-free, moisture-tolerant two-component 100% solids epoxy primer and sealer in a 1.5 gallon unit. It is used on damp substrates and green concrete, including as a primer for other Stratarock products.
- Adheres to damp concrete
- Foot traffic in 5 to 7 hours at 77 F
- Application temperature 50 F to 80 F
$183.34
Stratarock Epoxy Primer SF
Stratarock Epoxy Primer SF is a solvent-free, moisture-tolerant two-component 100% solids epoxy primer and sealer in a 1.5 gallon unit. It is used on damp substrates and green concrete, and as a primer for other Stratarock products. Application temperature is 50 F to 80 F, with excellent adhesion and deep penetration on warehouses, paper mills, food plants, and mechanical rooms.
Key Features
- Solvent-free 100% solids epoxy primer and sealer
- Adheres to damp substrates
- Can be applied to green concrete
- Excellent adhesion and deep penetration
- Foot traffic in 5 to 7 hours at 77 F
- Application temperature 50 F to 80 F
Applications
- Damp concrete floors
- Green concrete
- Warehouses and industrial facilities
- Paper mills, food processing plants, and mechanical rooms
Technical Specifications
| Property | Value |
|---|---|
| Tensile strength | 10,000 psi |
| Elongation | 5.0% |
| Bond strength | >400 psi |
| Hardness, ASTM D2240 Shore D | 80-84 |
| Thin film set time | 3-4 hours at 77 F |
| Pot life | 30 minutes |
| Foot traffic | 5 to 7 hours at 77 F |
| Coverage on concrete | Approximately 150-200 sq ft per gallon |
| Unit | 1.5 gallon |
| Shelf life | 1 year unopened at 75 F |
Product documents: Stratarock Epoxy Primer SF Data Sheet (PDF)
Frequently Asked Questions
What damp work uses Stratarock Epoxy Primer SF?
Damp substrates and green concrete, and as a primer for other Stratarock products. Moisture tolerance and a 50 F to 80 F application range make it a fit where floors are not dry.
What size is Stratarock Epoxy Primer SF?
The unit is 1.5 gallons. Parts A and B are in individual plastic jugs. 3 gallon units are available on special order.
What tensile strength does Stratarock Epoxy Primer SF have?
Typical laboratory tensile strength is 10,000 psi. Bond strength is greater than 400 psi. Elongation is 5.0%. Expect reasonable variation under field conditions.
What foot-traffic wait does Stratarock Epoxy Primer SF have?
It hardens for foot traffic in 5 to 7 hours at 77 F. Thin-film set is 3 to 4 hours at 77 F. Complete cure may require 18 to 72 hours, depending on temperature.
What application temperature does Stratarock Epoxy Primer SF need?
Surface temperatures of 50 F to 80 F are recommended during installation and cure. Material may be applied at lower temperatures; consult Indcon for details.
What Shore D hardness does Stratarock Epoxy Primer SF show?
Typical laboratory Shore D hardness is 80-84 (ASTM D2240). Expect reasonable variation under field conditions.
Please complete your information below to login.