Sika SikaGrout 713 55lb Bag

SikaGrout 713 is a cement-based grout with specially graded mineral aggregates. It can be used at any consistency from fluid to damp pack for applications that require precision support and early form stripping or shoulder trimming.

Single Component
Non-Bleeding
Pumpable, Highly Fluid

$76.09

Drop Shipped

SKU

20753

SikaGrout 713 – High-Precision Non-Shrink Mineral-Aggregate Grout (55 lb Bag)

SikaGrout 713 is a one-component, cement-based grout formulated with specially graded mineral aggregates for precision grouting of machinery, equipment bases, and structural components. This high-performance, non-shrink grout offers multiple placement consistencies—from fluid to damp pack—allowing flexibility on job sites. With excellent compressive strength, high flow characteristics, and resistance to bleeding or settlement, it delivers reliable load transfer and long-term performance. Ideal for demanding industrial and structural grouting applications, SikaGrout 713 meets ASTM C1107 and US Army Corps of Engineers CRD C621 standards and is freeze/thaw resistant for use in exterior environments.

Key Features:

Precision non-shrink grout with high compressive strength
Multiple placement consistencies: fluid, flowable, plastic, or damp-pack
Pumpable and self-leveling for intricate or inaccessible areas
Resists settlement, bleeding, and shrinkage
Ready-to-use, single component for ease of mixing and installation
Freeze/thaw resistant for interior or exterior applications
Meets ASTM C1107 (Grades B & C) and CRD C621 requirements
Early form stripping and shoulder trimming capability

Applications:

Precision grouting of equipment bases, columns, and soleplates
Pump and tank base installations
Grouting precast concrete panels, beams, and structural members
Grouting conveyors, fan housings, and drive motors
Anchoring bolts, rebar, and dowel rods

Technical Specifications:

Property	Plastic	Flowable	Fluid
1 Day Compressive Strength	3,400 psi	3,200 psi	1,000 psi
3 Day Compressive Strength	5,500 psi	4,800 psi	3,000 psi
7 Day Compressive Strength	7,000 psi	6,500 psi	5,000 psi
28 Day Compressive Strength	8,500 psi	7,500 psi	7,000 psi
Yield (Per 55 lb Bag)	Approx. 0.52 ft³ with 1.35 gallons of water
Flow Rate (ASTM C939)	25–30 seconds (fluid consistency)

Frequently Asked Questions:

What is the minimum placement thickness for SikaGrout 713?
The minimum recommended placement thickness is 1 inch. For lifts greater than 6 inches, consult a Sika representative.

Is this grout freeze/thaw resistant?
Yes, SikaGrout 713 is formulated for use in exterior applications and is freeze/thaw resistant.

Can this product be used in marine environments?
No, SikaGrout 713 is not recommended for marine environments or submerged conditions.

More Information