Parcel Orders over $300 Ship Free.
Sika Sikaflex 2C NS EZ Mix+ Limestone 1.5 Gallon Unit 597471
Sikaflex-2c NS EZ Mix+ is a two-component non-sag polyurethane sealant in a 1.5 gal pre-tinted Limestone unit for working joints at least 1/4 in deep. It seals vertical or horizontal joints with Class 50 movement capability.
- Pre-tinted Limestone 1.5 gal unit
- Class 50 movement for working joints
- Works on green concrete 24 hours after the pour
$72.20
Availability:
In stock
( 74 Available )
Sikaflex-2c NS EZ Mix+
Sikaflex-2c NS EZ Mix+ is a two-component, non-sag polyurethane elastomeric sealant for working joints at least 1/4 in deep. This 1.5 gal Limestone unit is pre-tinted; architectural colors use the Tint Base with a Universal Color-pak. Class 50 movement capability covers vertical and horizontal joints, including green or damp concrete within the published windows.
Key Features
- Two-component non-sag polyurethane elastomeric sealant
- ASTM C920 Class 50 movement capability
- Works on green concrete 24 hours after the pour
- Works on damp concrete 60 minutes after wetting
- Chemical cure for joints deeper than 1/2 in
- Exceptional cut and tear resistance
Applications
- Vertical and horizontal working joints at least 1/4 in deep
- EIFS and common construction substrates
- Canal and reservoir joints in submerged service
- Joints that need Class 50 movement capability
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | Sikaflex-2c NS EZ Mix+ |
| Type | Two-component non-sag polyurethane sealant |
| Pack | 1.5 gal unit |
| Color | Limestone (pre-tinted) |
| ASTM C920 | Type M, Grade NS, Class 50 |
| Working time at 73 F | Approximately 1.5 to 2.5 hours |
| Final cure | 3 days |
| Green concrete | 24 hours after pour |
| Damp concrete | 60 minutes after wetting |
| Application temperature | 40 F to 100 F |
| MPN | 597471 |
Product documents: Sikaflex-2c NS EZ Mix+ PDS (PDF)
Frequently Asked Questions
What joints is Sikaflex-2c NS EZ Mix+ used on?
Properly designed working joints with a minimum depth of 1/4 in, vertical or horizontal. Typical work includes construction joints, EIFS, and submerged canal or reservoir joints where a Class 50 non-sag polyurethane is specified.
What movement capability does Sikaflex-2c NS EZ Mix+ provide?
It is an ASTM C920 Type M, Grade NS, Class 50 sealant. Maximum expansion and contraction should not exceed 50% of average joint width.
What color is the Sikaflex-2c NS EZ Mix+ Limestone unit?
Limestone is pre-tinted in the pail, so Component A and B mix with a low-speed drill and no Color-pak. Architectural colors use Tint Base plus a Universal Color-pak.
What working time does Sikaflex-2c NS EZ Mix+ have at 73 F?
Approximately 1.5 to 2.5 hours at 73 F. At 40 F working time is approximately 3 hours; at 100 F it shortens to approximately 1 hour. Final cure is 3 days at 73 F and 50% RH.
What green-concrete timing does Sikaflex-2c NS EZ Mix+ allow?
It may be applied to green concrete 24 hours after the pour, and to damp concrete 60 minutes after the surface gets wet.
What potable-water listing does Sikaflex-2c NS EZ Mix+ carry?
It is certified to NSF/ANSI/CAN 61 for potable water contact, meeting applicable NSF/ANSI 600 requirements on the published sheet.
Please complete your information below to login.