Parcel Orders over $300 Ship Free.
Sika Sikadur AnchorFix-2 10oz Cartridge 112718
Sika AnchorFix-2 is a two-component epoxy acrylate adhesive anchor in a 10 fl oz cartridge for threaded rod and rebar in uncracked concrete. It mixes 10:1 and gels in approximately 3 minutes at 68 to 77 F.
- High-performance epoxy acrylate for uncracked concrete
- Mix ratio 10:1 by volume through a static mixer
- Non-sag consistency; gels in approximately 3 minutes at 68 to 77 F
$33.17
Availability:
Out of stock
Sika AnchorFix-2
Sika AnchorFix-2 is a high-performance two-component styrene-free epoxy acrylate adhesive anchoring system for threaded rod and reinforcing bar in uncracked concrete. This 10 fl oz cartridge (part 112718) mixes 10:1 by volume through a static mixer, holds non-sag consistency for overhead work, and gels in approximately 3 minutes at 68 to 77 F cartridge temperature. It is formulated for heavy-duty anchors in uncracked concrete, solid masonry, and hard natural stone after a bond check.
Key Features
- Two-component styrene-free epoxy acrylate adhesive anchor
- Formulated for high load capacity in uncracked concrete
- Mix ratio A:B = 10:1 by volume
- Working time approximately 3 minutes at 68 to 77 F cartridge temperature
- Non-sag consistency for overhead placements
- Cartridge temperature for application is 41 to 68 F
Applications
- Anchoring rebar and reinforcing steel in uncracked concrete
- Threaded rods, bolts, and special fastening systems
- Solid masonry and hard natural stone after a suitability check
- Heavy-duty base plates, deck supports, railings, and columns
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | Sika AnchorFix-2 |
| Part no. | 112718 |
| Unit | 10 fl oz cartridge |
| Chemistry | Two-component styrene-free epoxy acrylate |
| Mix ratio | 10:1 by volume |
| Working time 68 to 77 F | Approximately 3 minutes |
| Load time 68 to 77 F | Approximately 40 minutes |
| Substrate | Uncracked concrete |
Product documents: Sika AnchorFix-2 Product Data Sheet (PDF)
Frequently Asked Questions
What anchors suit Sika AnchorFix-2?
Threaded rods, rebar, bolts, and special fasteners in uncracked concrete, plus solid masonry and hard stone after a bond check.
What mix ratio applies for Sika AnchorFix-2?
Component A to B = 10:1 by volume through the static mixer on the cartridge.
What working time should crews plan for Sika AnchorFix-2 at 68 to 77 F?
Approximately 3 minutes to gel at that cartridge temperature range, with full load in approximately 40 minutes.
What concrete condition does Sika AnchorFix-2 require?
Uncracked concrete. It is specified as a high-performance adhesive anchor for threaded bars in uncracked concrete.
What overhead behavior does Sika AnchorFix-2 have?
Non-sag consistency supports overhead placements when the hole is properly cleaned and filled.
What size is Sika AnchorFix-2?
The cartridge is 10 fl oz, part 112718.
Please complete your information below to login.