Parcel Orders over $300 Ship Free.
Sika Sikadur AnchorFix-1 10oz Cartridge
Sika AnchorFix-1 is a two-component polyester adhesive anchor in a 10.1 fl oz cartridge for threaded rod and rebar in uncracked concrete. It mixes 10:1 and gels in approximately 6 minutes at 68 to 77 F.
- Fast-curing polyester adhesive for uncracked concrete
- Mix ratio 10:1 by volume through a static mixer
- Non-sag consistency; gels in approximately 6 minutes at 68 to 77 F
$25.68
Availability:
Out of stock
Sika AnchorFix-1
Sika AnchorFix-1 is a fast-curing two-component styrene-free polyester adhesive anchoring system for threaded rod and reinforcing bar in uncracked concrete. This 10.1 fl oz cartridge (part 497984) mixes 10:1 by volume through a static mixer, holds non-sag consistency for overhead work, and gels in approximately 6 minutes at 68 to 77 F cartridge temperature. Use it for rebar, threaded rods, and bolts in uncracked concrete, solid masonry, and hard natural stone after a bond check.
Key Features
- Two-component styrene-free polyester adhesive anchor
- Formulated for threaded rod and rebar in uncracked concrete
- Mix ratio A:B = 10:1 by volume
- Working time approximately 6 minutes at 68 to 77 F cartridge temperature
- Non-sag consistency for overhead placements
- ETA approval for threaded bars per ETAG 001-5
Applications
- Anchoring rebar and reinforcing steel in uncracked concrete
- Threaded rods, bolts, and special fasteners
- Solid masonry and hard natural stone after a suitability check
- Fast-cure anchoring where styrene-free polyester is specified
Technical Specifications
| Property | Value |
|---|---|
| Manufacturer | Sika |
| Product | Sika AnchorFix-1 |
| Part no. | 497984 |
| Unit | 10.1 fl oz cartridge |
| Chemistry | Two-component styrene-free polyester |
| Mix ratio | 10:1 by volume |
| Working time 68 to 77 F | Approximately 6 minutes |
| Load time 68 to 77 F | Approximately 50 minutes |
| Substrate | Uncracked concrete |
Product documents: Sika AnchorFix-1 Product Data Sheet (PDF)
Frequently Asked Questions
What anchors suit Sika AnchorFix-1?
Threaded rods, rebar, bolts, and special fasteners in uncracked concrete, plus solid masonry and hard stone after a bond check.
What mix ratio applies for Sika AnchorFix-1?
Component A to B = 10:1 by volume through the static mixer on the cartridge.
What working time should crews plan for Sika AnchorFix-1 at 68 to 77 F?
Approximately 6 minutes to gel at that cartridge temperature range, with full load in approximately 50 minutes.
What concrete condition does Sika AnchorFix-1 require?
Uncracked concrete. It is not for cracked-concrete adhesive anchors.
What overhead behavior does Sika AnchorFix-1 have?
Non-sag consistency supports overhead placements when the hole is properly cleaned and filled.
What size is Sika AnchorFix-1?
The cartridge is 10.1 fl oz, part 497984.
Please complete your information below to login.