Parcel Orders over $300 Ship Free.
Metzger McGuire Edge-Pro 80 Case 12 Standard Gray 600ml Cartridge
Metzger McGuire Edge-Pro 80 Standard Gray is a two-part 100% solids rapid-setting polyurea joint filler in a 600 ml dual-cartridge case of 12 for stained and polished retail floors. The filler is ground flush with the slab after placement.
- Wet grind at 30 minutes
- Dry grind at 3-4 hours
- USDA, FDA, CFIA accepted
$509.14
Drop Shipped
Metzger McGuire Edge-Pro 80 - Case 12 Standard Gray 600ml Cartridge
Metzger McGuire Edge-Pro 80 is a two-part 100% solids rapid-setting polyurea joint filler in Standard Gray. It is used on stained or polished exposed concrete retail floors and the same interior warehouse slabs where a flush filler protects control-joint edges. It is placed as 600 ml (300:300) dual cartridge kits in a case of 12. Wet grind or polish can start at 30 minutes, dry grind is 3 to 4 hours at 70 F, and the mix ratio is 1:1 by volume.
Key Features
- The filler is used on stained or polished retail floors.
- Wet grind can start 30 minutes after placement.
- Dry grind waits 3 to 4 hours.
- Mix ratio is 1:1 by volume.
- Saw-cut joints fill full depth, with a 2 in minimum in deeper joints.
- USDA, FDA, and CFIA acceptance is on this cartridge.
Applications
- Stained or polished exposed concrete retail floors are filled with this polyurea.
- Control-joint edges stay protected after a flush grind.
- Standard Gray is the color on those retail slabs.
- Interior warehouse slabs take the same flush fill.
Technical Specifications
| Property | Value |
|---|---|
| Hardness, Shore A @ 70 F | 80-81 (D-2240) |
| Tensile Strength | 505 psi (D-638) |
| Tensile Elongation | 152% (D-638) |
| Gel Time @ 70 F | 35 seconds |
| Tack Free @ 70 F | 3 minutes |
| Traffic Ready @ 70 F | 1 hour |
| Mix Ratio (by vol.) | 1:1 |
| Operating Temperature | -20 F to +120 F interior |
| Shave Window | 15 min to 24 hrs |
| Packaging | 600 ML (300:300) dual cartridge kits, Standard Gray, case of 12 |
Product documents: Edge-Pro 80 Technical Data Sheet EP-1 REVISED 9/25 (PDF) | Edge-Pro 80 Safety Data Sheet 10/2024 (PDF)
Frequently Asked Questions
What polish-cartridge work is Metzger McGuire Edge-Pro 80 used on?
It fills stained or polished retail floors so control-joint edges stay protected after a flush grind.
What size is Metzger McGuire Edge-Pro 80?
The pack is 600 ml (300:300) dual cartridge kits, case of 12.
What cartridge grind is on Metzger McGuire Edge-Pro 80?
Wet grind can start at 30 minutes, and dry grind waits 3 to 4 hours at 70 F.
What cartridge tensile is on Metzger McGuire Edge-Pro 80?
Cured tensile is 505 psi with 152 percent elongation.
What cartridge joint depth is on Metzger McGuire Edge-Pro 80?
Saw-cuts fill full depth, or 2 in minimum in joints deeper than 2 in.
What cartridge food marks are on Metzger McGuire Edge-Pro 80?
USDA, FDA, and CFIA acceptance is on inspected interiors.
Please complete your information below to login.